Quantcast
Jump to content


1987 Suzuki LT 4wd Carb problem


bklion

Recommended Posts

Hi everybody, I have a problem with a 1987 Suzuki LT4wd I just aquired. It ran just OK when I got it except the carb would over flow if you didnt turn of the gas right away, so I figured it was the float or the needle & seat. So I got a carb kit & cleaned the carb ( I thought really good) & installed the new parts. That fixed the overflowing problem & it idles just fine but as soon as I give it gas it kills. There seems to be plenty of fuel in the bowl, I've taken it apart with fuel in it & the bowl is about half full. While idling I shot carb cleaner in the carb intake while working the gas & it reeves up fine. So it seems to me that its not sucking the fuel up out of the bowl. I couldn't find any vacuum leaks & the main jet isn't plugged anybody know what I'm missing? Its a Mikuni Carb & there fairly simple. Any help would be much appreciated. I've had it off & on so many times it only takes about 3 minutes now. Thanks in advance for any help.

Link to comment
Share on other sites

Never mind, Thats what happens when your over 50 & you take something apart over a week ago. I pressed the Jet for the needle jet in from the top instead of from the bowl side. Runs great now. I guess if you look at the carb parts breakdown long enough something will click.

Lesson learned, I better not disassemble before I have the parts to Assemble.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By semicolon
      Hi, I am having issues with my TRX350D fuel pump.  It suddenly stopped running so I have replaced all the fuses and cleaned all the terminals.  I have fitted a new pump, fuel cut-off relay and rectifier.  Still nothing!!  The pump runs when attached to a battery.  The engine will start on the choke and the filter fills with fuel but it will  not rev and dies when the choke is closed. I have power to the relay but nothing at the pump black/white wire when cranking the engine.  Any ideas where to go from here would be very much appreciated!!
       
    • By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.
    • By ResQ91
      Hi guys
      My 87 Bear 350 won't start and could use a hand.
      Turn key on and Oil light turns on and then slowly fades out. (I think this is key to this) No start, not even a tick.
      battery and connections good
      A Solenoid post jump turns it over
      Neutral Safety Switch wire attached and seems good
      It has not had a wire/switch on Rear Brake Pedal ever since I had it.
      Any thoughts on some other things to troubleshoot this??
    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
×
×
  • Create New...