Quantcast
Jump to content

Recommended Posts

Posted

Hi everybody, I have a problem with a 1987 Suzuki LT4wd I just aquired. It ran just OK when I got it except the carb would over flow if you didnt turn of the gas right away, so I figured it was the float or the needle & seat. So I got a carb kit & cleaned the carb ( I thought really good) & installed the new parts. That fixed the overflowing problem & it idles just fine but as soon as I give it gas it kills. There seems to be plenty of fuel in the bowl, I've taken it apart with fuel in it & the bowl is about half full. While idling I shot carb cleaner in the carb intake while working the gas & it reeves up fine. So it seems to me that its not sucking the fuel up out of the bowl. I couldn't find any vacuum leaks & the main jet isn't plugged anybody know what I'm missing? Its a Mikuni Carb & there fairly simple. Any help would be much appreciated. I've had it off & on so many times it only takes about 3 minutes now. Thanks in advance for any help.

Posted

Never mind, Thats what happens when your over 50 & you take something apart over a week ago. I pressed the Jet for the needle jet in from the top instead of from the bowl side. Runs great now. I guess if you look at the carb parts breakdown long enough something will click.

Lesson learned, I better not disassemble before I have the parts to Assemble.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By kevinohio
      Does anyone have a copie of the owners/operators manual.the basic book that comes with the atv.i need the smaller one.i have the great big repair manual one.
    • By buriedpast
      As the title says, I've got a crankcase full of fuel / oil to deal with and figure I'll just start from the top and move through the system.  Going to start with a rebuild of the petcock and then the carb if the problem isn't fixed with the petcock rebuild.  I figure I'll go with a Moose kit unless others with experience recommend another brand (All Balls, etc.)
      Any suggestions?  Thanks in advance.
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
×
×
  • Create New...