Quantcast
Jump to content

Recommended Posts

  • 2 weeks later...
Posted

Thanks for the welcome. I need the service manual for 1998 Kawasaki Bayou 300 4x4 (KLF 300 4x4). I see on one of your other replies that you might have one. i would appreciate it if you could send it to me.

I need to know how to get the cv axle itself apart to change the boots. any help would be great.

thank you.

Posted (edited)
Kawa said:
Thanks for the welcome. I need the service manual for 1998 Kawasaki Bayou 300 4x4 (KLF 300 4x4). I see on one of your other replies that you might have one. i would appreciate it if you could send it to me.

I need to know how to get the cv axle itself apart to change the boots. any help would be great.

thank you.

https://www.yousendit.com/download/TEhXYnV5Tk0wZ25xYk1UQw

big file, 174 Mb's .....

Edited by Ajmboy
Dead Link
  • 3 weeks later...
Posted (edited)

i was wondering if you could send me what you have for the 1994 bayou 220. i am in the middle of a no spark issue and have got wires everywhere. Thank you if you are able to.

Edited by oxidized_black
Posted
cbbubby78 said:
i was wondering if you could send me what you have for the 1994 bayou 220. i am in the middle of a no spark issue and have got wires everywhere. Thank you if you are able to.

i just have the owner's manual, hope it helps, just download from this link ....

 

 

  • 2 weeks later...
Posted
oxidized_black said:

these are the manuals i have to date for Kawasaki. if anyone sees one they need, just message me and you'll have it.

need manual for a 1986 300 kaw fourwheeler it has a sticker on it that says differental its a 5speed has a reverse switch oh the handle bar area and a lever on the side to lock the diff

Posted (edited)

tried to log in on you send it its not working with your info i need a manual for a 86 or 87 300 kaw 4wheeler its has a differential lock on the side and a reverse switch up on the steering

Edited by oxidized_black
  • 2 weeks later...
  • 2 weeks later...
Posted (edited)
Hi, and thanks, oxidized black . Youre the greatest !

i changed the passwords because someone deleted one of my accounts. So either i let things go and no one had manuals, or i kept it private to me and i would post a link. what manual are you after and i'll post the link for you ....

Edited by oxidized_black

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Popular Now

  • Similar Forum Topics

    • By cavry
      O3 sat a while. Engine is running fine. I got it into neutral, did some general tune-up and cleaning then pulled the shifter pedal up and it locked up and will not release into neutral again.  Does anyone have experience with this problem?  Thanks for looking and any help.
      Cavry
    • By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

×
×
  • Create New...