Quantcast
Jump to content

Recommended Posts

Posted (edited)

Good morning everyone. As we continue to take massive strides in promoting responsible use of public lands in order to minimize impacts on the environment, other users, and future recreational access we are starting to look more and more to our volunteers. The Tread Trainer program started in 2003 to help build an "army" of volunteers to help support and encourage responsible recreation within their communities, and through that program, we currently have nearly 500 active trainers nationwide. Tread Trainers are equipped after a one-day course with tools and training to host awareness workshops, and provide outreach. Master Trainers are equipped after a two-day course to not only provide those same, but also to train Tread Trainers in their areas.

Interested in helping us in your area?

Here is an updated list of our upcoming Trainer Courses:

Master Tread Trainer:

October 6 - Rausch Creek Off-Road Park in Tremont, Pennsylvania

November 17 - Uwharrie Off-Road Training Center in Uwharrie, North Carolina

To view more detailed information or to register - Tread Lightly - Master Trainer Courses

Tread Trainer:

To view more detailed information or to register - Tread Lightly - Trainer Courses

To request a course in your area, email [email protected]

386850_10150980157818342_665084374_n.jpg

Edited by TreadLightly
Posted
How do I attend this training and what do I need? October 6 - Rausch Creek Off-Road Park in Tremont, Pennsylvania

If you click on the link in the post above, below the list of Master Courses, it will take you to the webpage with the list of courses on Treadlightly.org. There is a "register" button underneath the course listing.

Looking forward to seeing you there!

  • 1 month later...
Posted
Thanks. I must have missed the link when I was checking it out before. I have a few ATV clubs in our area thinking about joining.

Glad to hear it. Let us know if there is anything we can do to answer any questions about joining or benefits.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By HHurks
      Hi to all
      Newbie here. Not new to ATVs. Look forward to learning a few new things and hope to maybe help some too.
    • By alexwv1863
      I'm currently working on an 04 Suzuki Eiger 400 and ran into some issues. Main issue being it's really hard to start. Once I get it started, it runs bad. Sounds like it's missing, which I'm pretty sure is an idle issue. It's not my 4 wheeler. I'm working on it for a buddy. Someone started working on the original carb and 2 jets were missing when I got it to work on.
      So, I ordered a new carb. To get it to run, I had to adjust the throttle screw on the handle bar almost all of the way out. Even doing that, it still sounds like it's bogging down and missing. 
      I did put a gas filter on it, which I'm questioning whether or not that's the issue and it's not getting enough gas like it should. The petcock only has an On, Reserve, and Prime option. It also has 2 ports. I guess I have the hoses hooked up right. There's no way to shut the gas off completely, and also it looks like there's no gas getting thru unless I run it on Prime. Reserve drips gas. I'm going to take it apart today and clean it. I'm also going to take the jets I need out of the new carb and put in the old one. 
      I don't know what all this person did you the 4 wheeler before I got it. There's odds and ends missing that I've noticed so far. What else can I try or look for? What could be the gas issue with the carb and petcock? The carb was completely off the bike except hanging onto the throttle cable. The diagram I found for the carb doesn't help me with hose placements. Any help, or questions would be appreciated. I can attach photos if it would be of help.
    • By Vlaco
      Hi. I just joined the community. I have a sheep farm and use a Polaris 500HO, Polaris 700efi and a JD Gator 825i for different jobs around the farm. I do all the repairs myself so I am sometimes needing some advice and maybe I can be of some help to others as well. 
    • By Sean3255
      I have a 2005 Suzuki king quad 700, it quit starting. so I replaced the fuel pump and the injector, and it would run. After about 6 times it was running then just quit and now it will not start again. Any ideas??? TIA
×
×
  • Create New...