Quantcast
Jump to content

Recommended Posts

Posted

My friend has a Yamaha Warrior 350 with ITP Holeshots. He keeps getting stuck cause they are flat track tires. We ride trails and creeks. He has been stuck in the creek a few times and he is finally ready for new tires. Right now he has 20X11X9 on it. I think the rim is 9 inches wide, maybe 9 and a half. The default size for the tire is listed as 22X11X9. We are looking to put a set of ITP Mud Lite AT ATV Tires on it. They have the tire in the default 22X11X9 but he really wants to get the 25X12X9.

My question is will there be a problem using a 12 inch wide instead of a 11 inch wide tire. I don't think there really would be a problem but I want to be sure before I order the tires tomorrow morning for him.

ITP-Mud-Lite-AT-ATV-Tire link

Posted

id actually go with kenda bear claws. the mud lites probably wouldn't be good according to what my local ATV dealer told me and it makes sense to me. the mud lites were mainly designed for 700+ quads so therefore a smaller quad wouldn't have the power to turn them over easily to go through mud properly. having a 12" wide tire would help if you can get the proper size for it. a 25" tall tire would probably be to much for the quad as its default is 22" and id think would need a lift kit although im not fully sure. id get bear claws in the default size if its not to late

Posted

Well I made a decision that he'll have to live with. I went with the 22X11X9. I read something that made me decide not to order the 25's. I knew it was harder on the low end and stuff like that. But didn't think about the bigger tires make higher center of gravity. Which translate to flipping it easier.

Seen that the actual default tire size is 22X10X9 but I didn't see them listed anywhere.

  • 1 month later...
Posted
according to what my local ATV dealer told me and it makes sense to me. the mud lites were mainly designed for 700+ quads so therefore a smaller quad wouldn't have the power to turn them over easily to go through mud properly.

My son rides a 450 Kodiak, with a set of Mudlite XLs( in the stock size) on it.It has more than enough power to turn them, and it works great in the mud.That being said, I decided to go with Swamplites(again stock size) on my 550 Grizzly, because I think that the Mudlites are pretty hard on the drive line, they do hook pretty hard, and I know from years of drag racing that some tire slip can save drive line parts a lot of abuse. My Swamplites have gotten me through every where that I have gone with them , and they are 6 ply construction, giving much better stiffness, for less side roll and sway. I'll tell you right now, that these tires have made my atv a whole new animal, and before someone says replacing worn out tires will make a big difference on any machine, I replaced mine with just 100 kms(60 miles ) on them.

Scott

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By 1998Zuki250
      Looking to see if anyone has any input on ATV Tires? 1998 Suzuki quadrunner LTF250
    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By Kaz
      Troubleshooting a no spark issue, was running OK, maybe a little rich, turned it off, now no spark. I've checked/ohmed out the main key switch, the start/stop switch, neutral switch, brake switch - all good. It will crank the starter, but no spark with the starter or when I try the pull start. I've checked all fuses and diodes. Swapped battery. New plug. New coil. Swapped in a used CDI - no help. Traced, removed, cleaned, reattached all grounds. Removed things like my winch from the circuits to be sure a bad relay or something was dragging it down. When testing voltages, the orange wire going from the CDI to the ignition coil shows no/very low voltage-shouldn't it have 12V on it? Sometimes I get a very weak, intermittent glow on my spark tester, but not enough to fire the plug. I've checked continuity on just about all wires in the harness. Checked/cleaned/lubed w dielectric grease- all connections, redid a few that looked old/dirty. I've checked the stator resistances, all good, but have a stator and rectifier ordered anyway, will arrive Sunday. I verified that the rectifier has a voltage output back to charge the battery while cranking - 10.5-11V, low, but expected while starter is engaged. What else can I check as part of troubleshooting? I have a Haines service manual, but the 1999 350 4x4 seems to be an odd model, there isn't an exact electrical diagram for it, but found one for another year that has all the same number of wires and same color wires, so I've referenced that. Any hints, tips or advice would be appreciated! Thanks!
    • By fwsamm
      Im aware that this relay needs a positive (+) and a negative (-) to activate the other side. The blue wire is the neutral wire so when in neutral it gets ground. The green wire is from the parking break; when you pull the break in it gets ground (-). however one of those two needs to be neutral so that the positive from kill switch can go to the starter relay. The ground from the starter relay is from the start switch. Which one (neutral or parking break) should have a positive (+) voltage?
×
×
  • Create New...