Quantcast
Jump to content


Recommended Posts

Aside from changing the oil and filters etc. what do you guys routinely do to maintain/tune-up your quad while the "season" KS over and the machine will be basically over for a few mos. I have a 2006 Sportsman 500 EFI APand I want to keep it a long time and want to do all I can to see that that happens.

Thanks in advance for your time,

Bill

Link to comment
Share on other sites

Yes all fluids changed. If you have 4x4 check all shafts and diff fluids. Take off plastics and do a visually frame/chasis inspection. Remove all electrical connectors and fill with dielectric grease. Use a ethanol treatment in gas tank. Thoughly clean off seasons mud and gunk. Any machined surface gets a spray of wd40 except for brake rotors obviously. Spray cleaned plastics and tires with armor-all or spray wax. Check tire pressure. Remove spark plug and put a couple teaspoons of motor oil in there. Crank over motor for a second then reinstall plug.

Sent from my SGH-T989 using Xparent Blue Tapatalk 2

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By JohnnyB
      Greetings, 
      Have a 88 LT80 that been sitting for a couple years. Bought a new piston, cylinder and head. Installed these, rolled it over and it quickly locks up.  Took carb apart. It was full of what appears to be 2 cycle oil. Cleaned it, but keeps locking up and 2 cycle oil continues to seap from exhaust port.  When i installed new cylinder, I noticed crankcase was full of oil.  I'm now wondering if that oil is what's getting sucked up into cylinder.  Should there be no oil in crankcase?  If that the case, how is crank and rod lubricated?  Sorry, never worked on a 2 stroke. Thanks!
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By mga
      I see quite a few ads for that  Tribotex additive. It's kind of expensive, has anyone used it it their ATV or any other vehicle?
    • By Slitzer
      Hi,
      Got a Big Boss produced 2016 YM 2017 that gives DTC 520 285 2 (random)
      What I understand is correlation code for brakesensors, very little information in workshop manual.
      Removed front plastic to discover that no connector was mounted on the brake pressure switch!?
      The only "brake" information seems to come from the micro switch at the brake lever.
      Does anyone know if Polaris does anything special on the 6x6 or had this issue?
×
×
  • Create New...