Quantcast
Jump to content

Recommended Posts

Posted

This list offers a general overview of ATV vehicle maintenance. Remember to keep your owner's manual handy and consult a master repair manual or your local dealer for further details.

Engine

Change oil and filter (4-Strokes)

Change oil filter and check oil pump cable adjustment (2-Strokes)

Check oil lines and oil tank vent lines for kinks or leaks

Change Counter Balancer oil (400 cc 2-stroke engines)

Inspect Air Filter, Pre-Cleaner and Engine Breather Filter. Replace as necessary.

Inspect Carburetor Air Intake Ducts/Flange for proper sealing/air leaks.

Replace Fuel Filter and inspect fuel cap, lines, fuel valve, fuel pump, and carburetor for cracks, leaks or kinks in lines. Repair or replace as necessary.

Cooling system: Check coolant strength, fill level, and inspect hoses. Repair or replace as needed.

Radiator: Inspect and clean external surface.

Check fasteners and motor mounts. * Refer to service manual or local dealer for torque specs.

Electrical

Replace spark plug. Check ignition timing or have your local dealer check ignition timing.

Battery: Clean terminals, check fluid level, charge battery (see battery maintenance article for more information on battery maintenance).

Lights: Check headlamp, tail lamp, running lamps and brake lamp. Replace or repair as needed.

Check switches (headlamp, brake, AWD, key, etc.) for proper operation. Repair or replace as needed.

Verify brake and throttle controls move freely.

Chassis

General Lubrication: Check front hub fluid or bearings. Change fluid or pack wheel bearings as needed. Grease chassis.

Transmission/Gear Case: Change fluid, check shift adjustments, check for leaks. Repair as needed.

Drive Chain: Inspect, adjust and lubricate.

Brakes: Check fluid level in master cylinder, brake pad wear, and lever travel. Fill, repair, and replace as needed.

Check suspension fasteners for proper torque (refer to service manual or local dealer for torque specs).

If you have something to add, please post it up.

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By cavry
      O3 sat a while. Engine is running fine. I got it into neutral, did some general tune-up and cleaning then pulled the shifter pedal up and it locked up and will not release into neutral again.  Does anyone have experience with this problem?  Thanks for looking and any help.
      Cavry
    • By Mikey509
      Hi everyone, first and foremost, I want to thank everyone for all the help I've received. I am so glad I found this community. I also wanna apologize if I'm spamming the forum, I come up with questions as I go, I guess lol. So when I got my Recon, the air box was missing the lid, held together by zip ties, and the filter was ripped and nasty. I have since ordered a new air box assembly. It comes with everything: the box,  lid, and filter ( the insert and the foam), and all the hardware necessary. This is the first time I've seen a metal filter inside a foam filter lol. However, my question is, I have read that you have to oil these filters? Every time I read it, it was always skimmed over, and I could not remember where I had read it. Is there a certain oil needed for this? Is the filter washable and reusable? Do I just stick the filter in oil, lol? Sorry if it sounds like a dumb question. Thanks in advance, y'all!
    • By bradleyheathhays
      Unfortunately it looks like I have some people in my new neighborhood paying a little too much attention to my auto and for the first time I'm feeling a need to add some security system(s) to old yeller.  I think just a basic remote arm system would do, not interested at all in remote start or unlock.  I'm not familiar with modern alarm systems, but here's what I 'think' I need...
      - Door switches for all 5 doors (rear hatch).  Probably a PITA to install but that's only an initial idea.
      - 'Bump' alarm (not sure what it would be called) for if a window breaks or if something is jarred
      - Geo-location function like a low track or something similar
      Additionally I'd like to install possibly 2 start kill switches.  I'm not sure where inline these are normally installed but my impression is that directly in line with the key ignition switch would be common.  But then what if someone jumps the starter with a screwdriver...would this type of switch work in that instance?  So that leads me to the idea of a second ignition kill switch which would either be wired between the battery and starter motor, or between the starter motor and ground.
      And last...security lugs.
      So am I over thinking this here?  What's your recommendation for what I really need and maybe a good but economic alarm system that can get this done?                    
    • By kevinohio
      Does anyone have a copie of the owners/operators manual.the basic book that comes with the atv.i need the smaller one.i have the great big repair manual one.
    • By Admin
      View File 2013-2016 Polaris RZR 570 service manual
      Download the 2013-2016 Polaris RZR 570 service manual PDF for complete factory repair, maintenance, troubleshooting, and diagnostic procedures. This comprehensive Polaris RZR 570 repair manual covers all major systems including engine service, EFI fuel injection, transmission and clutch repair, drivetrain maintenance, suspension, steering, brakes, electrical troubleshooting, wiring diagrams, torque specifications, and factory maintenance schedules.
      Designed for RZR owners, mechanics, trail riders, racers, and DIY enthusiasts, this factory-style service manual provides detailed step-by-step instructions and diagrams for maintaining, troubleshooting, repairing, and rebuilding the Polaris RZR 570 side-by-side UTV.
      Topics covered include:
      Polaris RZR 570 engine repair
      EFI fuel injection diagnostics
      CVT clutch and transmission troubleshooting
      Drivetrain and differential service
      Suspension and steering maintenance
      Brake system repair
      Electrical troubleshooting and wiring diagrams
      Oil change procedures and maintenance intervals
      Torque specs and factory service data
      Polaris RZR diagnostic procedures
      Popular related searches:
      2013 Polaris RZR 570 service manual PDF
      Polaris RZR 570 repair manual
      RZR 570 wiring diagram
      Polaris RZR torque specs
      RZR 570 clutch problems
      Polaris RZR maintenance schedule
      Polaris UTV factory service manual PDF
      This Polaris factory repair manual is ideal for owners looking to maintain, troubleshoot, repair, or upgrade their RZR 570 for trail riding, recreational off-roading, hunting, racing, and utility use. Whether you're performing routine maintenance or a complete rebuild, this manual provides the factory information needed to keep your Polaris RZR 570 running at peak performance.
      Submitter Admin Submitted 05/30/2026 Category Polaris UTV  
×
×
  • Create New...