Quantcast
Jump to content

Recommended Posts

Posted

Hi im new here and need some help.

we have a 2000 Honda 450 Foreman and it gets used almost everyday. Im a trapper so i use it everymorning to check traps. we take it mudding and climbing and everything. it gets used like a work horse. well its run fine up untill the last week or so. we just snorkelled it and i wanted to see how itd run so i was driving it around and all of a sudden heard this loud popping noise and it wouldnt move anymore. you can spin the tires and its smooth but when its in gear it starts to knock. me and my dad took the whole rearend of tonight thinking it could be some of the gears in the rearend but theyre all completely fine. so my question is do yall have any idea on what could be wrong with it? thank you so much or any help

Posted

are you sure the noise is coming from the rear and not the transmission? Im not familiar with the foreman but does it have a driveshaft instead of a chain? If so maybe its the universal joints on the driveshaft. They went bad on my Yamaha Moto4 and it was a loud metallic pop every few seconds but only when in gear. when it was in neutral and on jackstands no noise.

  • 9 months later...
Posted

the noise you described might have something to do with the snorkel , that is if you never herd the noise be for you added the snorkel. ive herd a popping noise twice . first time i herd a noise like that was from abuddies rubicon after he wrecked it hard. it was the front end some were in the drive line was popping when he turned the wheels. but that wasnt hard to figure out cause the whole front end was completly trashed on the count of him running his 4wheeler of the end of a train trussel . the other time i herd popping was from my friends foreman when he was trying to make his own exhaust, and that was because he had to much back pressure from running to small exhaust , which resulted was major engine failure , threw the rod out the bottom of block and then some. maybe that snorkel is to restrictive cause n some kind of detonation issues , are you shur its a pop not a rod knocking?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
×
×
  • Create New...