Quantcast
Jump to content

Recommended Posts

Posted

Hi im new here and need some help.

we have a 2000 Honda 450 Foreman and it gets used almost everyday. Im a trapper so i use it everymorning to check traps. we take it mudding and climbing and everything. it gets used like a work horse. well its run fine up untill the last week or so. we just snorkelled it and i wanted to see how itd run so i was driving it around and all of a sudden heard this loud popping noise and it wouldnt move anymore. you can spin the tires and its smooth but when its in gear it starts to knock. me and my dad took the whole rearend of tonight thinking it could be some of the gears in the rearend but theyre all completely fine. so my question is do yall have any idea on what could be wrong with it? thank you so much or any help

Posted

are you sure the noise is coming from the rear and not the transmission? Im not familiar with the foreman but does it have a driveshaft instead of a chain? If so maybe its the universal joints on the driveshaft. They went bad on my Yamaha Moto4 and it was a loud metallic pop every few seconds but only when in gear. when it was in neutral and on jackstands no noise.

  • 9 months later...
Posted

the noise you described might have something to do with the snorkel , that is if you never herd the noise be for you added the snorkel. ive herd a popping noise twice . first time i herd a noise like that was from abuddies rubicon after he wrecked it hard. it was the front end some were in the drive line was popping when he turned the wheels. but that wasnt hard to figure out cause the whole front end was completly trashed on the count of him running his 4wheeler of the end of a train trussel . the other time i herd popping was from my friends foreman when he was trying to make his own exhaust, and that was because he had to much back pressure from running to small exhaust , which resulted was major engine failure , threw the rod out the bottom of block and then some. maybe that snorkel is to restrictive cause n some kind of detonation issues , are you shur its a pop not a rod knocking?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      Just some friendly advice on new tires. Check with your ATV dealer. 
      There are so many aftermarket sites, Revco, Royal Distributing, Partzilla, and on and on. Even with their “ big sales”, my local Canam dealer’s REGULAR price beat the tire prices of the 3rd party sellers! People often assume the Dealership will cost them more, but I found this not to be true!
    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By tflack500tbx
      Background,
      This winter (Dec.) I was plowing and everything just died, just quit.  No lights, no pull start, No nothing.  I've had this problem before and I changed the voltage reg and it ran fine for over a year. Then this.  So I changed it again, thinking this was the same problem.  Tried to start it and a small pin hole in the CDI appeared with electrical smoke.  
      Months go by and I finally decide to just replace parts (I'm Horrible at electrical issues).  I changed the stator, new CDI, new Voltage reg, new starter solenoid, tested the starter (prefect), charged the battery.  
      Went to start it and the solenoid rapidly clicked.  All the dash lights on, headlights work.  Pull stared it and it fired right up no issues.  Looked into the rapidly clicking starter solenoid and it was not enough juice in the battery.  Took the battery completely out and hooked up a jump box to it turned the key, light on, everything looks good.  Pushed the starter button and it fired right up ran great.  Turned it off to test it again, Turned the key and nothing.  No dash lights nothing.  Took the jump box off and pulled started it.  Started it right up.  Re-hooked the jump box, still nothing.
      Any Ideas? 
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By quadnut20
      Looking at replacing tires on my 2003 Foreman and was seeing what everyone is recommending fore it ?? Its mostly a plow machine but in the summer the  kids take it out !! 
×
×
  • Create New...