Quantcast
Jump to content

Recommended Posts

Posted

Alright here we go mi have a fourtrax 300. Right the mountain all the time, and music would help. Gotta a cooler and wanna rig it up in that. Thinking of putting a extra battery for it and the 3500 pound winch and extra lights.. But where do I start? I don't know how to rig the radio to twelve volt or what to do battery wise. I'm thinking of running a outerwear on a snorkel. And then doing away with the air box so I can fab a battery box. Would this work?!

Also, spacers and a lift. I wanna do both. But will I be sacrificing my bearings? Thanks!

Sent from my iPad using Tapatalk HD

Posted

Mudrider, I agree with ctd44! On most ATVs you'll have an accessory plug which is limited on the amperage that should be drawn from it and if you exceed that limit most likely you'll drain both batteries very quickly. What I would do is find out what that limit is amperage wise on your ATV and what the amperage of the music player you want to use draws. If the music player meets the ATVs accessory plug amperage recommendations your good to go if not I would suggest looking into a power source such as a small 2 cycle generator. I myself have never connected a winch to mine but I would think it would run directly to the battery with an inline fuse at the battery just in case something gets shorted out between the battery and the winch. Hope This Helps!

Posted

a winch and other occasional use items you would be fine as the battery has some room to run it. if possible I try to keep my quad running when winching just to keep it charging

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • By Mikey509
      Hey guys i recently got a old recon 250 up and going and the prev owners had the carb screws all messed up. i was wondering if anyone can give me the basic run downs on if i turn both screws all the way "tightened" how many turns out will the quad run okay so i can then dial it in. the prev owner had the screws messed up so bad it woudnt idle. i got it to idle but idles rough. its super lean any guidence is appreciated 
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
×
×
  • Create New...