Quantcast
Jump to content

Recommended Posts

Posted

I have a 2013 Honda Rancher ES that wont start. Last night after running the atv for 10 minutes I parked it for 2 minutes. When I came back to start it up the atv would not run. It was turning over. All electronics are working properly. The battery is strong. I sprayed a little bit of carb cleaner in the intake with filter off and the atv started for a second. I changed the spark plug and it still wouldn't run. Whats the next step to check before giving up and taking it to the dealership?

Posted

i would pull the spark plug and make sure you have spark, i think you do because the carb spray almost started it, then i would pull the fuel supply hose and make sure you are getting gas. check too that the kill switch isnt on and the bike is in neutral ...

Posted

the kill switch is not on and the bike is in nuetral. Ill make sure im getting fuel...ill update this tomorrow night.

This is very wierd. I drove a few time last night and it ran great. then all of the sudden without notice it wouldn't start. THANK GOODNESS I was in the garage and not in the woods!!! Thanks for your replies.

Posted

Update:

I checked all fuses and all looked good. I powered up the atv and didn't hear the fuel pump cycle. I checked warranty and its good until the end of next month. So Im taking it to the Honda Dealership tomorrow for repairs. I will update this forum as soon as I find out what the issues are with the Honda.

oxidized_black- Thanks again for all of you help!

Posted

The dealership couldn't find an issue. They said after they went through everything and cleaned the terminals on the fuel pump that the four wheeler started right up. So Im guessing the issue was a bad connection. Thanks for all of your help.

  • 6 years later...
Posted
On 4/11/2020 at 6:27 PM, Randy Hood said:

My 2013 honda rancher wont start. The magnetic cylinoid that connects behind battery just clicks.  I have replaced it with a new one new starter new battery. It still just clicks.  Please help

Can you jump the starter solenoid?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...