Quantcast
Jump to content

Recommended Posts

Posted

just got this bike, it runs but not well, doesnt smoke or anything but i noticed that when you try to start it, the spark plug keeps firing for a few seconds after the engine stops whirling over, and can hear it buzzing in the bottom end where the stator is, anyone know what this could be? also the only way it will start is to put my hand over the back of the carb, using the choke ( enrichener) doesnt do anything and the carb is rebuilt, thanks in advance

Posted (edited)

how are the diaphragms ?

could be cracked and split allowing air ,,, vent/vacuum lines ok ?

not sure about the spark keeping on going ... any way you can test the regulator or cdi ? seems something isnt shutting down at the right time ... maybe the cdi more so ...

Edited by oxidized_black
Posted

i havent checked the starting issue yet, im more concerned about the spark issue at the moment, i have worked on hundreds of bikes over the years but have never come across this problem before, i have talked to lots of mechanics and noone seems to have heard of this either, the starting issue will be a pretty simple fix, im sure its just in the carb ( process of elimination ) it has a new carb kit in it so there arent many other parts in there, ill check the diaphrams like you said next, but first id like to see if antone else has ever had the spark problem before and if they did, what did they do to fix it? im going to check the pickup coil and see if maybe its set too close to the stator allowing spark to jump when its not supposed to

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By TomJulio
      My 1992 TRX00 recently stopped firing.  I understand this is a common problem. I have ordered an aftermarket CDI unit.    TJ
×
×
  • Create New...