Quantcast
Jump to content

Recommended Posts

Posted

Hey guy and gals

I'm a new-be here an just need a lot of help

So please forgive me if I'm doing this wrong!

First off My name is Rob and thanks for having me here you'll.

I just acquired a 1997 farm hand bayou 300 4x4 that is in need of a lot of TLC I traded the fella even up for and old Yamaha street bike I had about $850 into that ran good and did not leak or burn oil but still needed many minor things like brake worked seat and so on

So about the Bayou-it runs starts right up and all but is missing some things like the front and rear racks clutch lever and small plastic cover in front of handle bars

My issue is that the fella said he put new piston & rings in it about a week ago and checked out the clutches like I said it runs and I know I should have taken more time to check everything out so when I got it home I found out there was no air breather and I can't see how one would have even fit on there the way the carb is so close to the inner frame rail under the seat on it and it started leaking oil pretty bad from the clutch cover (it was clean oil though light in color)

The quad is not bad lookin and I can weld up some racks for it but I really need a service manual for this old work horse!!!!! I have no issue following directions other than sometimes giving my own creative touches LOL

ANY HELP WOULD BE SO MUCH APPRECIATED

THANK YOU AND HAVE A BLESSED DAY

ROB

  • 4 years later...
Posted

I just bought a 1999 Kawasaki Bayou and it won't fire but one time then stop. I'm needing to see the wiring diagram to try and troubleshoot this problem. My hope is that this manual will have enough information to work with. I'll post again once I have reviewed it. Thank you so much for posting this file.The vehicle is old and finding good info other than the owner's manual has been difficult. God bless you!

  • 2 weeks later...
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By tflack500tbx
      Background,
      This winter (Dec.) I was plowing and everything just died, just quit.  No lights, no pull start, No nothing.  I've had this problem before and I changed the voltage reg and it ran fine for over a year. Then this.  So I changed it again, thinking this was the same problem.  Tried to start it and a small pin hole in the CDI appeared with electrical smoke.  
      Months go by and I finally decide to just replace parts (I'm Horrible at electrical issues).  I changed the stator, new CDI, new Voltage reg, new starter solenoid, tested the starter (prefect), charged the battery.  
      Went to start it and the solenoid rapidly clicked.  All the dash lights on, headlights work.  Pull stared it and it fired right up no issues.  Looked into the rapidly clicking starter solenoid and it was not enough juice in the battery.  Took the battery completely out and hooked up a jump box to it turned the key, light on, everything looks good.  Pushed the starter button and it fired right up ran great.  Turned it off to test it again, Turned the key and nothing.  No dash lights nothing.  Took the jump box off and pulled started it.  Started it right up.  Re-hooked the jump box, still nothing.
      Any Ideas? 
    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By kevinohio
      When I bought my atv.its missing the air filter.on the parts diagram.it shows the air filter cage separate.but in my air filter box.it looks like it has an air filter cage fastened to air filter box.do I need a air filter cage on top of piece in air box.
       
    • By Gtc4d
      I recently purchased a raptor 80 for my grandson for  christmas. I am trying to make sure it is running properly. i have rebuilt the carb and adjusted the carb idle then the mixture to middle of where it runs rough and it runs great for about a min or 2. then it stalls out. I can usually choke it and it will start so i feel it is lacking fuel. the fuel shutoff valve has been changed and i checked it for good fuel flow.  any ideas of what to check next. I am planning to vfy fuel float height tomorrow. I visually checked it by turning carb upside down when i had it apart and it looked level. any ideas are appreciated. 
       
      Thanks.
      Todd
    • By digrig
      Hey everyone,
      I’m having an issue with my 2021 Polaris Sportsman 570 – the engine keeps stalling after running for about 10–15 minutes. I’ve checked the air filter, spark plug, and fuel lines, but can’t seem to find the root of the problem. It starts up just fine, but then loses power suddenly.
      Has anyone experienced a similar issue with this model/year? Would appreciate any advice or troubleshooting tips you’ve tried that worked. Thanks in advance for your help!
×
×
  • Create New...