Quantcast
Jump to content

Recommended Posts

Posted

i have a 2003 polaris trail boss, it hasent been run i about 2 years. the shifter is froze up and wont budge, does anyone know how to get it unstuck?

also i need to know what wire to unplug so i can get it too start in any gear. thanks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By jen
      Wow...I packed a small soft side cooler with an ice pack  at -4 F and inserted my Type K thermocouple sensor inside so I could monitor the temperature without opening.  After 3 hours  the inside temperature was 60  F...OMG!   The ice pack  was solid frozen.   Standard temperature for safe storage is < 40 F.     What I found by asking was that there should be no air space in the cooler.  Packed with Ice preferably ice from connivence store (normally 0 F of less).  Food should take up  short day trip1:1 ratio.
      Good coolers are expensive.
    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
×
×
  • Create New...