Quantcast
Jump to content

Recommended Posts

Posted

hello everyone. I purchased a second hand honda foreman 450. I thought I found a diamond int he rough, but it appears to be a rough diamond. haha. My problem is related to two wires under the right rear fender above the tire (see pic). The wires are cut, and I'm unsure where they go. One wire appears to be yellow with a red stripe, the second appears to be a brownish color....... originally I had a green with red stripe wire, and grey wire cut, but I located those and re-wired them. Any help would be appreciated...... I hope this is related, but the iginition switch (neutral light/lights) don't seem to respond. I can crank the quad by arking the cylanoid, but i assume it has something to do with these wires. any help is appreciated. I just need to know where the wires go.

foreman.jpg

foreman.jpg.77278103fe4b4eebe25ef07cab12c9c7.jpg

Posted

had the same bike, it is a diamond ... yellow/red wire is a hot wire, is there power to it ?

the brown is probably the neutral/safety switch located on the backside of motor/transmission.

if your lights dont come on (neutral), somehow someone may have tried to bypass the switch. you probably have no spark when you turn it over ?

Posted

hi oxidized_black. I haven't checked power to it. I pulled all the fuses as soon as I got it to the house. the "light fuse was blown". I traced the green/red wire over the drivers side by the foot area. From the research i did I think it has something to do with tricking the atv into neutral if it is grounded. I actualy do have spark. The atv will actually crank if you arc cylonoid. (with fuses back in). It's as if the ignition key doesnt allow the lights/neutral to come on, but i assume it has to have power as it will crank. Maybe the ignition has power to all 4 wire? I have a manual, but I'm no electrician.... I just don't know where they go. It could be possible that the tie end with the green/red and brown wire that i already re-wired?

Posted

Still tinkering. I pulled the connection to the ignition under gas tank and found I have no power going to ignition......... I started back at battery and noticed I have a connection missing. Can anyone tell me where the other half of this red wire goes. See pic again thanks in advance,

image.jpg

image.jpg.101b10b06a58102371bca774ce90498f.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By Gwbarm
      Have you ever been on the trail and your tire valve goes bad. No way to break down the wheel and replace it. A lot of you probably know about this already i had heard of it but never used one. Just punch out the old one insert and tighten down the nut
       

       

       

       
      So far it has worked very well.
    • By hfrost112
      whats the best way to seal the bead on a tire
    • By Trent Finnessey
      I’ve got a 2000 400ex with a dg slip on muffler, it came with he stock muffler on it but the previous owner had the dg in a box so I put it on. I’ve been riding it for the past month and a half and every time I let off it backfires, and the other day the backfires got way louder, 2x louder! I’m concerned that I may hurt my motor? Why does is backfire??? Thanks
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
×
×
  • Create New...