Quantcast
Jump to content

01 Suzuki Quadmaster 500

pandacasserole

By pandacasserole
in Suzuki ATV Forum

 Share

Recommended Posts

pandacasserole Newbie

pandacasserole

Posted
Posted

We got this bad boy off of craigslist and it was great for about 1000 feet. It stalled and we were not able to start it back up/ via starter.

I started it back up adjusted the carb and cleaned it up, found the fuel shutoff valve was backwards. so then we get out and run it again. Somehow it stalled again, except this time the starter wouldn't start it. tried pulling no luck.

Check the starter and the wire running from the solenoid is starting to melt. Removed the starter and tested it, it runs smoothly. took a screwdriver to the bendix gear and it won't move... I can't find any decent service manuals and I'm thinking that it's the bendix locked up.

It will pull, idk about pull start, sounds like the engine is turning.

My next step is to pull off the cover, is it just rtv sealant?

I'm new to atvs but not to mechanic work.

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • rjsummer
      Suzuki LT185 electric start question
      By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • Rockbottom
      2008 Yamaha Big Bear 400 will not start
      By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • Mister907
      2000 Yamaha big bear 400 won’t start
      By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • HoldenBoy
      Starter not staying engaged while cranking
      By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • Brent Wright
      What's a good size ATV to start a 10 year old on?
      By Brent Wright
      What's a good size to start a 10 year old on?

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...