Quantcast
Jump to content

1985 Honda sx250 ATC - Water In Diff

ac10

By ac10
in ATC 3-Wheeler Forum

 Share

Recommended Posts

Ajmboy Grand Master

Ajmboy

Posted
Posted

Any seal that is worn out or torn could allow water in, however it may just not be water tight. Where is the water coming out, by the wheels? The problem is that you'll lose lubrication in the process.

Sent from my iPhone using Tapatalk

ac10 Rookie

ac10

Posted
  • Author
Posted
Any seal that is worn out or torn could allow water in, however it may just not be water tight. Where is the water coming out, by the wheels? The problem is that you'll lose lubrication in the process.

Sent from my iPhone using Tapatalk

no water coming out just noticed brown milky oil in diff.Decided to take apart and found both dust seals N.G. must be where water coming in.Is there seals inside diff on side bearings ? ...cause they must be shot as water is coming inside diff.....

  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • LCP92
      Leaking valve seals?
      By LCP92
      Guys, I've got a 1999 Honda Foreman 450S.  It runs great, but smokes out the exhaust after startup until it warms up.  I'm thinking the valve seals are leaking.  I was wondering if there is a way to replace them without removing the head or if there's an oil additive that will recondition the rubber seals.  Any advice?
    • drobbie98
      Thanks for having me.
      By drobbie98
      Hey all, Thanks for having me in the forum. I just purchased my first ATV and am stoked to understand more about it. 

      The first stupid question will be, what is everyone's maintenance schedule? DO yo follow the recommended intervals or build one yourself based on the machine. 
       
      Thanks in advance. 
    • David Cameron
      2006 Yamaha Grizzly 660 water line connection
      By David Cameron
      The small waterline insert for the hose that goes from the water pump cover to the thermostat housing has corroded off. I only need the insert on top and behind the thermostat housing that the hose goes over and can't find just the insert. It looks like it may be pressed in. I've have been told the entire motor housing needs to be replaced. The pic with the red line indicates where the hose and insert would be and the insert looks like the pic of the water pump  Any ideas would be really appreciated.
       
       



    • n4cer26
      Cooling trouble after water pump rebuild.
      By n4cer26
      Just finished replacing water pump seals and impeller on my 97 Magnum 425 due to oil leak out of the weep hole. Haven't owned it very long and have only riden around the yard a couple times because I only recently got it. I installed a new bullet aluminum impeller and made sure the nut was tight and that thebimpeller was not spinning on the shaft. My oil leak is now fixed.
       
      I filled the radiator and let it run. The motor seemed to be getting hot and the radiator fan never came on. Looking into the radiator its hard to tell if the coolant is circulating due to the vibration of the quad. Never looked down the radiator prior to pump rebuild so not sure how it compares now.
       
      Think it could be a bad thermostat or air in the system? Is there a refill procedure? Any advise is appreciated!
       
      Sent from my SM-F926U using Tapatalk
       
       
    • n4cer26
      1997 Polaris Magnum 425 Oil leak from water pump weep hole
      By n4cer26
      I chased down the leak on my 97 Magnum 425. I have a nice leak coming from the water pump weep hole. I am being told the oil seal inside the pump needs to be replaced. Can anyone tell me what is involved in the repair. Can it be done without pulling the motor? Thank you!
       
      Sent from my SM-F926U using Tapatalk
       
       

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...