crankin

Sorry I have not been on here for a while. Started having problems with my truck. Just put an exhaust on it. I have Drs appointments this week. Will get back on it by the weekend. Does anybody know where I can get a bulb?

My light has been out for years but it always cranked if it was in neutral. I did find a little black box in wiring harness but I believe it only has two wires going to it. I'll double check that. I checked the bulb with an ohmmeter and it checked as open compared to the reverse bulb. Somebody added modified floorboards to this one which hides the neutral switch. Thanks again for your asvice

The neutral light burned out and I can't find a replacement. Bought one off Ebay last year but it wasn't right one. Guy never responded when I told it was wrong. I know it is in neutral because I can push it around. Can't do that when in gear. I guess I'll have to get a neutral switch and start tearing brackets off to get to it. Thanks for your response.

I have a 1997 Yamaha Big Bear 350 4x4. It used to start right up. Then all of a sudden it wouldn't crank. I have a schematic for it so I started tracing the problem. I had no power at the starter solenoid. According to the schematic the power comes from the neutral switch and through the starter circuit cut out relay. I cannot locate the cut out relay on this machine.. If I apply power to the relay it will crank with the start button. The neutral switch is hard to get to with all the brackets on this thing. I did find out from all my research that if I apply the rear brake lever it will start. Does anybody know if the cut out relay exists and where it might be found?

toyotatrukin, Hopefully you will see this before buying your carb. I found one at zoomzoomparts.com through amazon and it was only around $140. It was delivered in about three days. Perfect fit and this quad never ran so good! I got the quad used and not running so good. I had to use low range to go anywhere. Now I don't even use low range.

This is the 4 wheel drive one. Does anyone know why this year has such a special carb? Is there a way to install a different type, like a 2 wd one or a Warrior?

I need to replace the u-joints on the front driveshaft. I am having trouble getting the axles out to remove the differential. Might need advice on removing the driveshaft as well.

Hi, I am new to this site. Joined to check out the forums, mostly mechanical issues. I work in the outdoors maintaining public lands in Pennsylvania. Enjoy riding. Tread lightly so we get invited back