Quantcast
Jump to content

Ron Jones

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by Ron Jones

  1. Check eBay I bought one last year all in all with the shipping was under $80 Canadian
  2. That’s where my breather hoses go on my 2000 grizzly. Look for witness marks where it is now. If it passes under a little bar and the rubber is really kinked there like it’s been there for a while good chance that it is in its spot.
  3. this sounds like the float is out of adjustment or the valve/needle that it pushes on is dirty and possibly jammed. That is for excess gas building up in the air box. If the overflow line clogs it will fill your air box and possibly the crank case. As for the lack of power, once again I would tend to think your main jet is not picking up the gas as in dirty and or clogged. I like to use a torch tip cleaner (welding acetlyne) to pass through all the little holes in all the jets. Also when cleaning the carb always try to get as much of it apart as you can and let the jets soak over night in a quality carb cleaner. also a new properly gapped plug never hurt any motor,
×
×
  • Create New...