marioweldinginc

:thumbup:

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Yes on here. Gobto the shop manual thread. If not pm Oxidized Black he should steer you in the right direction

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Never did one of those but I know when working on hydraulic pistons, sometimes the roll pin comes out in one direction only. Sort of like a tapered pin. Also you might just have to give it a little more umpff.

Do you have a shop manual?

Did you buy it or you have a question about it?

Did you try bypassing the solenoid? put 12v from the battery directly to the starter. If it wont try to engage its probably a bad starter. If nothing do a amp test on the battery and check any components in between the battery and the starter (including the start button! Might be gummed up with oxide)

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Welcome to QC!!

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Took the survey on my phone not sure if it worked

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Relay might be sticking. Find it and give it a tap

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Is that you hitting the rev limiter or is it breaking up. Thats a wicked ride!

Sent from my SGH-T989 using Xparent BlueTapatalk 2

All Ive seen are pics of a pretty bike where is the helmet cam!!

Sent from my SGH-T989 using Xparent BlueTapatalk 2

On a 400ex it might mean your rear carrier bearings are shot. Lift the rear off the ground and wiggle / spin the axle. Any sort of play or noise means you might need new bearings. Also check to make sure the axle lock nut is tight. Its in between the brake rotor and axle carrier

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Sounds wicked. Why the start button under the fender. Makes a clean install or is it a safety reason?

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Would start by checking ALL electrical connections and water proofing them. Also maybe your gauge cluster got a little water in it

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Voted!

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Very trick and quality work!

Sent from my SGH-T989 using Xparent BlueTapatalk 2

JYeah alot of Tri-State Trail Riders and Black Rock Trail Riders are posting on the FB forums about the Game Commision heavily fining atv riders as soon as they cross over onto state land from RAC land. Even though these guys all have RAC permits. Stay away from trails that cross near or over the railroad tracks as those are heavily patrolled now.

On a brighter note check out AOAA. They are building a atv trail system in the area and should be completed this year.

anthraciteadventure.com ....please support this if you can

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Welcome back and pictures please...i use my phone for most everything and i know alot of times its fustrating to use!

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Ummm make sure the footage just isnt the sky

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Very nice project Rappy. An expensive one I bet. Are you going to race it?

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Anyone familiar with this trail system? If so please PM me thanks

Honda Atv forum

Atv connection

Also part of a few Facebook atv groups

Black Rock Trail Riders

Tri State Trail Riders

PA Coal Climbers

Welcome to QC!!

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Sorry meant I only have one sticker on my bike that is easy to remove for the graphics.

What prep does an atver have to do before sending plastics to you?

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Hey Wylde1!! Thanks for doing that. Did you like the page, or send a friend request?

I liked it, friend request coming up....hold on to your hat

Please post some pics of your work... as you can see I have a blank canvas cept for 1 sticker