Search the Community
Showing results for tags ' jumping'.
Found 3 results
So I went through the top end and then put everything back together and did break in and then probably 3-4 rides. Now my start button doesnt work but i can jump the solenoid and it starts right up. I looked for bad connects and didnt see any. I then replaced the coil and got nothing. So before i blow more money on something i dont know if it will work, i would like your guys opinion on what it would be. Thanks. Oh and it is a suzuki 160 '91
Hey everyone! Working on a 400ex for a friend of my mom's because it will only start when you jump the solenoid. I have pretty much gone through all the wiring from the battery up to the plug for the start button and nothing is broken or connected incorrectly. I tested the yellow/green and yellow/red wires that come from solenoid and they both read 0 volts as they should. The key switch reads 12v as I believe it should as well. What has me stumped is that the black wire that comes out of the start button assembly reads different voltage numbers, although I know it should be 12v. Is it the start button for sure or could something else be causing me to get that reading? Thanks and sorry for the long post