Quantcast
Jump to content


90's Honda 300 TRX 4WD - Spark Issue


mo70ss

Recommended Posts

I am working on an early 90's Honda 300TRX 4WD. The problem is no spark. I have downloaded a manual but it has not helped yet. The problem is I have no voltage to the ignition coil. Any idea why there is no voltage from either the BL/Y or the G wire that connects to the ignition coil? Thanks in advance!

Edited by mo70ss
Added year
Link to comment
Share on other sites

No I have not. The only things I have tested is the CDI and the igniton coil. They both checked out fine. I am MUCH more familiar with automotive repairs and terminology. Could you shed some light on how I would go about testing the stator and pick up coil and where they are located? I appreciate any help.

Link to comment
Share on other sites

Hey oxidized_black...I am having a time finding the AC sensor line! I have located the 3P alternator connector and the alternator charging coil but I cannot find the AC sensor line. Can you explain what I am looking for? The only other wiring I see is the wiring that is surrounded by a rubber boot that goes to the alternator itself and I dont know how to remove them. I pulled the boot back and there does not appear to be a plug for the wires??

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By fishhouse3
      FOR SALE: 2021 CFMOTO ZForce 800 Trail with many extras and full warranty until 2027. Only 625 miles and 50 hours of use.
      In great condition, has a clean title and one adult owner. Has had all scheduled regular maintenance and has not been abused. Only used about six times on weekend trips to Hatfield-McCoy trails in WV.
      Under full CFMOTO Care bumper-to-bumper extended warranty until 8/2027 (paid $1,600). Full service and tune up just completed with new clutch, drive shaft, belt, rollers, etc (paid $1500). Plus it comes with over $3,500 in upgrades and accessories! Way too many included items to list here (see last pics for full details).
      This machine is ready to go and needs nothing - just hop in and hit the trails!  I have over $20k invested in this machine. Priced VERY fair to sell quick at less than half that!!!
      $9,999 WITHOUT warranty -OR- $10,999 WITH full extended warranty until 8/2027.
      Located in Chesterfield, VA 23832. Message me for more pics and info!





    • By mbirt
      Hey all,
      Just picked up two dead mid-90's Kawasaki Bayou 220s for $250. Already have one running on starting fluid and it sounds healthier than expected. Moving onto a thorough carb cleaning and refurb of the brakes next. These are our first ATVs and we're excited to make family memories on simple, approachable machines on our newly acquired land.
      In case anyone reads this, is it worth rushing to 10 posts here to get the Bayou 220 FSM if I already have a Bayou 250 FSM?
       
      Thanks, 
      Matt
       
    • By Params_sweden
      Hi!
      I got my KLF300 running again with your help a couple of months ago, at that time it was the ignition coil that had failed. It has been in use since then without issues until two weeks ago.
      When the new issue showed I was going at about 10km/h and it suddenly slowed to a halt. I started it again after that with choke and I drove it 400 meters and parked. Next time it was really hard to start, and since it was low on gas I thought that was the problem. It didn't get any better with a full tank, so I assumed it was the cold weather, and adjusted the pilot slightly.
      After that it I actually got it started again with full choke and some slight gas, I drove about 300 meters and then it slowed down to a halt again. After that, it hasn't started again.
      The compression is 165psi. The spark has good intensity, the ATV has functioned before with the same spark "intensity"/light. I *assume* that it has gas as well, there is definitely gas on the spark plug when I remove it
      I have checked the carburetor slightly, the float works, diaphragm looks ok, but I haven't disassembled it to really look for dust and such in all the small places.
      My theory right now is that it might've been some dust in the gas tank that went into the system, it's just a theory
      I'm thankful for all the help and pointers I can get, don't hesitate

      / Pär, Sweden

    • By Dan Kroes
      Does anyone know if there is a tool for torquing the bearing nut and jam nut on Polaris solid rear axles? Seems like it must exist if factory says 150 ft lbs. What would it be called?
    • By JoeB
      Hello, Trying to see if anyone on here has been into these trails yet this year. I havn't been in in almost 10 years and am not sure of the conditions. Last time I was in was over 10 years ago and I went in on a 2wd quad, someone thought the mudholes had gotten far to large for that now. We have winches and recover gear and 2 of 5 quads have  4WD. I also cant recaul if the road into the trail head is high grade or not, was hoping to use our class c motrhome as a tow rig, but if its not graveled its not worth getting it stuck if it rains.
       
      Thanks
×
×
  • Create New...