Quantcast
Jump to content

Recommended Posts

Posted (edited)

Been a life long dream of mine to have a 4x4 and so now I've finally decided to put out the money to make it happen. My budget's 2,000 - 2,500 so obviously I'm looking for something used, and I'm writing in to ask you guys what I should be looking for a what I should avoid.

I'll be using it mostly for just moderate trail riding and camping so it doesn't have to be a monster machine. Requirements are that it have a lot of potential rack space, automatic and be fully 4x4. So far after looking at a lot of offers I seem to be settling on some of the 2005-2007 Polaris Sportsman models. They seem to have some flexibility as to what type of components you can add on...racks, gun racks, etc.

I'm fairly mechanically inclined and could probably do any maintenance or part upgrade outside of getting too deep into the motor.

So what are some of the models I should be looking out for? And are there any I should be avoiding?

Also, so far craig's list has been my only source to find sellers. Any other suggestions for where to look for leads?

Thanks

Edited by bradleyheathhays
Posted (edited)

Really grateful for all the support! No piece of info or advice is out of place here.

Based on some of the initial feedback I've changed my parameters just a little, I think much toward the better. First I'm increasing my budget to, at tops, $3500. I'm sure that'll help get me into a much less worrisome 4x. Also, the requirement for full auto is now dropped. I'm not a stranger to a foot shifter so that should be no problem. And lastly even though the Polaris have great rack options I've heard just enough negative about the older ones that I'll be steering away from them somewhat. Still looking for something with good front and rear racks and fully 4x4 though.

Any additional suggestions now that my budget's been given a boost?

Edited by bradleyheathhays
Posted

Ive got a 95 big bear 350 anniversary edition that i rebuilt from the ground up and wow do i love this machine. geared nice and low and built like a freakin tank without being crazy heavy. Full time 4x4 with high and low range.

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • By Trent Finnessey
      I’ve got a 2000 400ex with a dg slip on muffler, it came with he stock muffler on it but the previous owner had the dg in a box so I put it on. I’ve been riding it for the past month and a half and every time I let off it backfires, and the other day the backfires got way louder, 2x louder! I’m concerned that I may hurt my motor? Why does is backfire??? Thanks
    • By Kaz
      Troubleshooting a no spark issue, was running OK, maybe a little rich, turned it off, now no spark. I've checked/ohmed out the main key switch, the start/stop switch, neutral switch, brake switch - all good. It will crank the starter, but no spark with the starter or when I try the pull start. I've checked all fuses and diodes. Swapped battery. New plug. New coil. Swapped in a used CDI - no help. Traced, removed, cleaned, reattached all grounds. Removed things like my winch from the circuits to be sure a bad relay or something was dragging it down. When testing voltages, the orange wire going from the CDI to the ignition coil shows no/very low voltage-shouldn't it have 12V on it? Sometimes I get a very weak, intermittent glow on my spark tester, but not enough to fire the plug. I've checked continuity on just about all wires in the harness. Checked/cleaned/lubed w dielectric grease- all connections, redid a few that looked old/dirty. I've checked the stator resistances, all good, but have a stator and rectifier ordered anyway, will arrive Sunday. I verified that the rectifier has a voltage output back to charge the battery while cranking - 10.5-11V, low, but expected while starter is engaged. What else can I check as part of troubleshooting? I have a Haines service manual, but the 1999 350 4x4 seems to be an odd model, there isn't an exact electrical diagram for it, but found one for another year that has all the same number of wires and same color wires, so I've referenced that. Any hints, tips or advice would be appreciated! Thanks!
    • By Randomnumber73
      I'm working on my uncles grizzly and it sparks once on initial cranking then no more after that. If I let off the start button then press the start button again it will spark once then stop sparking. I was wondering if anyone seen this issue before.  Also I've never used forums before so sorry if this question is in the wrong location.
×
×
  • Create New...