Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Jw7054

Start button doesnt work. Jumping solenoid does.

Recommended Posts

So I went through the top end and then put everything back together and did break in and then probably 3-4 rides. Now my start button doesnt work but i can jump the solenoid and it starts right up. I looked for bad connects and didnt see any. I then replaced the coil and got nothing. So before i blow more money on something i dont know if it will work, i would like your guys opinion on what it would be. Thanks. Oh and it is a suzuki 160 '91

Share this post


Link to post
Share on other sites


Is there a starter relay? If you have a multimeter, check the start button first. Then the relay. It's got to be one of the two.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Freezeman
      Well I came on here hoping to read a manual about the quad but found that I have to make some posts before that can happen, so here is one. 
      I work on peoples stuff. Had this well used unit come to me with a no start issue. I found it had fuel  and spark was good but it only had 30 pounds of compression. I put each cylinder to TDC and feed the plug hole with a small amount of air pressure and could hear the escaping air coming out the carb openings. I then checked the valves lash at TDC and found that booth cylinders had 0 lash for the intake valves. I reset the lash to .003 for all the intake valves and reapplied a small amount of air pressure and the leaking of air was gone. I then spent a few hours screwing all the parts I had to take off, back together and then drove it out of the shop.
      The lash was only 1/4- 1/2 a turn too tight that caused the valve to stay open just enough to make it not start. IMO the heads could use an overhaul some time soon as the valves and seats have become a bit warn.
      These ATV's just have too much crap stuffed into a small space, I wounder how many fasteners are used to hold 1 ATV together?
      Later, 
    • By Rob113
      Hello guys! I ride a triton 450 super moto. i hawe change connecting road... Now all is okey,test drive ok manny km done. But there is one problem...i hawe buy a new accu. But the starter is verry hard rotate...almost stops.  So the motor is wery hard to start. I hawe trie connect the starter directley to accu and its the same thing.Before rebuild the starter has work normal.
      What hawe i done wrong?
      Sorry for my English:)
    • By mikeexplorer
      ARCTIC CAT BRANDED SIDE-BY-SIDES AND ATVS ARE COMING BACK
      Passion can change people. Change minds. And in the end, it can take us back to where our family has been all along. Because Arctic Cat fans and powersports enthusiasts demanded it, the Arctic Cat® name will be returning to ATVs and Side-by-Sides in 2019.
      With a legacy of innovation, performance and fun, our legendary lineup of ATVs, side-by-sides and snowmobiles are built to take you anywhere you want to go — from carving up mountain snow on a Mountain Cat Alpha One in British Columbia, to flying over the dunes in Glamis in a Wildcat™ XX. And these high-performance vehicles are still made proudly in Thief River Falls, Minnesota.
       
      https://www.arcticcat.com/the-cat-is-back/
       
    • By Lellwyn Griffin
      I need to replace the starter solenoid on a 2000 Bear tracker.  The OEM is about $70 and aftermarket ranges between $10-$20.  Should I buy the OEM or is there an aftermarket brand that is good?   
    • By Barb
      I have a 2000 350 Honda Rancher has a electrical problem battery seams charged but won't start put jumper on start ridgt up take jumper off won't start .
  • Similar Tagged Content

    • By Ironfist104
      My wolverine has a new carb kit, new battery cranks over and over take it to the point of killing the battery to start sometime.... but it I give a tug on the start rope while I'm cranking it with the starter it fires right up.... any advice?
    • By izzydum1
      Any ideas on what would make a coil not fire? She was running fine, then began slow start. Now wont start at all.
    • By Suzuki24
      I have an 04 ltz and it started sputtering a little bit while going down the road and I was low on gas so I just figured that's what it was. But now I can't get it to start I completely cleaned the carberator put a new spark plug and coil pack in it and all it does is turn over. It has compression it's getting fuel and it is sparking but all it does is turn over any idea what it is??
    • By jerrymcoo1
      If you keep the starter button down it will run alittle let off the starter and it dies ? HELP
    • By RichUncleSkeleton
      Hello
      Just signed up, as I've had a recurring problem, and need some help.
      To start the bike I have to put the choke on all the way and 4 squeezes on the gas, Then as I push the start, I slow squeeze the throttle about half way for it to catch....If I miss it, then it will take 5 mins of slowly finding the sweetspot on the choke in unison with some throttle squeezes.
      Then I have to to hold the throttle to keep the bike going, using the choke will stall it out. after about 3 mins of holding the throttle, I then can let it go, and it idles fine, and runs fine. If it sits for a few hours it's only slightly hard to start, but a few days of sitting, and it's a lot more work.
      Had the bike serviced they couldn't figure it out. They swapped peticock, plug, new gas, all new lines, new throttle, and cable. Said the carb was fine, and clean. New air filter, said fuel pump was fine, no leaks around carb boots, new battery, new rectifier.
      Ran some sea foam through it....Runs Great.....Just such a pain to start...
      Thanks
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...