Quantcast
Jump to content

Recommended Posts

Posted

I have on 08 Outlander 800XT Are there any free mods you can do to these?

I know in the past it almost doesnt matter what you drive. There is always free mods you can do either for performance or longevity of the machine. 
I had a Honda XR250 With several free mods you could do like the biggest thing was the header there was a huge weld bead inside the chocked down the exhaust. You grind that down a little (free) and way better throttle response. 

Thanks looking forward to see what all is out there.  

  • 4 weeks later...
Posted

I understand what you mean by free mods. Little mods you can do without spending any money.  Things like removing the air box lid and smoothing out welds. I don't know of any for Outlanders. The air box lid removal is the only one I ever used and that is universal.

Posted
8 hours ago, quadmaniac said:

What do you mean by free? Tuning? There are always mods but they cost money like tires, exhaust etc. 🙂

There are mods Ive been able to do on other atvs dirt bikes cars etc.,etc.,  I know if I wanted to make it faster or stronger or more capable of off roading.  I can always buy aftermarket stuff and put on there.   Anyone can do that.  Anyone can buy aftermarket performance stuff and put it on.  
I was curious if there were anything I can do with what is on there and modify what I have to make better.   

Posted
On 2/9/2017 at 5:22 PM, Too_Late_I_Won said:

There are mods Ive been able to do on other atvs dirt bikes cars etc.,etc.,  I know if I wanted to make it faster or stronger or more capable of off roading.  I can always buy aftermarket stuff and put on there.   Anyone can do that.  Anyone can buy aftermarket performance stuff and put it on.  
I was curious if there were anything I can do with what is on there and modify what I have to make better.   

Got it, was just asking. So really you are looking for tuning without replacing. That quad is fuel injected right? 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By Coyote251
      I am hooking up a speaker on the rear of bike and want to use a factory auxiliary switched plug and not have to cut into the factory wiring or add another switch. I have read a bunch of posts that say there should be an auxiliary 12V connector in the front and one in the rear. I found the one in the front when I hooked up my winch but cannot find any in the rear. I have seen some pictures showing one on the right side attached to the down tube behind the side cover, but there is nothing on my 2024. Can anyone confirm that there is a auxiliary 12V connector in the rear on the 2024 700 Xmr? If so, can you please tell me where it is (with a picture if possible)?
    • By Admin
      View File 1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      Submitter Admin Submitted 03/08/2026 Category Honda ATV  
    • By toe420
      Hey everyone, I just picked up a 91 trx350 4x4 with a blown top end. I don't know what happened to the poor thing but the cam journals that were round are oval shaped now. I also bought a running engine from a 92 trx350 4x4 to swap into the 91. Is there anything in particular I should be checking while the engine is out and I have good access to it and the frame? 
×
×
  • Create New...