Quantcast
Jump to content

Recommended Posts

Posted

First poster in this forum! 😁 I don't know much about Hisun ATVs, so I went to their web page to check them out. Looks like  good line up from 110 CC to 1000 CC.

ABOUT US

Hisun Motor Corporation might not be the most familiar name in Powersports, but there’s a good chance you’ve already enjoyed one of our many UTV’s or ATV’s. For years, Hisun Motors has provided products for some of the biggest names in UTV and ATV markets. In fact, Hisun Motors Corp USA consistently ranks among the largest providers of UTV’s in the United States and Canada year after year.

Hisun Motors Corp USA is far more than an importer; more than a name behind a faceless manufacturer. We are the wholly owned subsidiary of a manufacturer with the power of a 7,100,000 square foot factory backing every product. Our sophisticated production facility builds products designed by a team of US based experts and built from the ground up with direct feedback from you the customer.

Final assembly of Hisun products is completed right here in the USA by a team of expert craftsmen skilled at making sure your ride is perfect. Our massive Dallas, Texas facility houses, parts, customer service, and multiple assembly areas. In fact, call us today, we’d love to talk to you about our products and how we support some of best machines traveling the trails and back roads of the USA.

 

  • AXIS 110

    AXIS 110

    STARTING AT: $2,099

  • FORGE 110

    FORGE 110

    STARTING AT: $2,199

  • FORGE 250

    FORGE 250

    STARTING AT: $4,399

  • FORGE 400

    FORGE 400

    STARTING AT: $4,999

  • TACTIC 450 2-UP

    TACTIC 450 2-UP

    STARTING AT: $5,999

  • TACTIC 550 2-UP

    TACTIC 550 2-UP

    STARTING AT: $6,699

  • TACTIC 750 2-UP

    TACTIC 750 2-UP

    STARTING AT: $7,599

  • FORGE 500/700

    FORGE 500/700

    STARTING AT: $5,999 / $6,999 ENGINE OPTIONS: 500/700

  • TACTIC 800

    TACTIC 800

    STARTING AT: $8,499

  • TACTIC 1000

    TACTIC 1000

    STARTING AT: $9,999

  • 1 year later...
Posted (edited)

Hi.

This may be a off the wall post but here goes.

I'm looking at a career change and I'm thinking about getting into the ATV/UTV business.   I'm in Eastern Tennessee and off roading is HUGE in this area.  

The thing is I know nothing about the business itself.  Can I sell?  Yes; I did some sales work at one time in my career.  Manage?  Yes; the past 12 years my job has been technical logistics.  And for the most part managing technical people all over the country.  But I've never owned or operated my own business.  I guess some tips on how to get started would be very helpful.

Thanks

OH< and BTW, I placed this in the Hisun forum because this is the brand is not represented here much.  You have the big name dealers (and much higher prices); want to take the trail less traveled.  :)

 

 

Edited by Todd Nunley
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just some friendly advice on new tires. Check with your ATV dealer. 
      There are so many aftermarket sites, Revco, Royal Distributing, Partzilla, and on and on. Even with their “ big sales”, my local Canam dealer’s REGULAR price beat the tire prices of the 3rd party sellers! People often assume the Dealership will cost them more, but I found this not to be true!
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By geezer99
      Well, I bought the Axis 500 sold at Lowes for $8999 a couple days ago.  This post will be about my impressions as I use, fix, and abuse the machine.  I will add to the post as I gain experience with it.
      Thanks to other posters on this site warning of new machines with loose hardware, one of my first actions was to crawl all over it checking fluids and connections.  Zirks were all freshly greased, fluids in engine, and gear boxes were up to level.  One of the little gas struts that help lift the bed to dump was dangling with only one end connected, and the other strut had not been fully tightened.
      Here are some things I don't like:
      The rear gearbox does not have a differential in it.  It is essentially a solid axle.  Tight turns on lawn will leave tracks, and turns are not as tight on pavement.  In my case this won't matter much, but if you plan to use it on a lawn, this will create tracks on turns.
      To check engine oil you need to remove both front seats and a plastic cover.  This according to the manual.  I'm pretty sure it can be checked with that stuff in place, either from under or above, but that remains to be seen.
      I am not used to a CVT transmission.  I am used to a clutch and multiple gears.  This one requires giving it plenty of gas out of the hole and then backing off to get it to shift up.  I'm sure I will get used to it, but I'd like to be able to take off quietly if I want to.
      The doors have bungie cords to act as springs to close them.  I removed the driver door so I would not need to fight the constant pressure to close.  Problem solved.  I will leave the passenger door as is.  Gotta keep the grandkids safe.
      The status display is hard to read if the sun is on it.
       
      Here is some stuff I like: 
      I was concerned about there being enough torque to slowly climb a steep hill.  There is.  I will elaborate more on this when I've had it on my steeper trails.
      The display has dedicated lights to indicate status of gear position, low oil pressure, over temp, and a bunch of other stuff.  This helps a beginner with feedback that an action taken was successful.
      The sparsity of knobs on the tires dig in well on most surfaces.  I bet they wear out fast on pavement.
      The tilt bed has a tail gate that is easy to operate.  Much like early Japan pickups.
      Steering is responsive and little slack.  Remains to be seen how long to get loose since the u-joints are operating at quite sharp angles.
      Seats are pretty nice.  Will be interesting to see how long it will take me to poke a screw driver though them.
      Seat belts are included to hold grand kids in.  Won't go over 5 mph if both aren't buckled.  Yeah, it works to buckle them empty.  Doing this leaves the belt high on back, so you don't have to sit on it. 
      Hauling it home, my trailer wheel wells were too close together to clear the tires of the UTV.  This required driving it off center a bit, with one set of tires inside the wells and one side driving over the wheel well.  Creeping over the one well required climbing a 10 inch vertical well.  The ability to lock the front axle differential kept both front wheels pulling as I drove the one side up and over the wheel well.  The guys at Lowes were impressed.  They won't touch any but an unobstructed flat trailer loading.
       
      As I gain more experience I will add to this topic,
      tom
       
       
       
       
    • By kawasig
      Hello there
      I'm having a problem finding a quality carburetor for a 1993 Suzuki Quad Runner lt-f 250 2x4. I find a lot that have 3-4 star ratings. And all so far don't have the right throttle Cable inlet at the top. The last one I got 4 star on Amazon has a threaded cable sheath rest that could be partially drilled to work. I would prefer to get one I don't have to modify. Any recommendations are greatly appreciated!
    • By ButchM
      Hisun 700 EFI. Replaced TMAP sensor had broken off . Fuel pump pressure 41psi. The only way I can keep it running (and runs fine) is to close off fuel return line. 
×
×
  • Create New...