Quantcast
Jump to content

SunF Mud Tires & clutching

dillegm
 Share

Recommended Posts

dillegm Apprentice

dillegm

Posted
Posted

I just purchased a set (4) of these for $349.00 on Amazon. They are going on my Cforce 400.

 

The guys on the CFMoto forum suggest I tune my clutch to make up for the increased weight, Tire Lug depth, etc.

 

I've been doing a ton of searching on CVTech clutches and I think I've found how to do it.

I've been told to add about 10g weight to my primary clutch and change the secondary to A1. If I don't do the weights I should atleast change the secondary to C1.

 

Does anyone here have experience with CVTech clutches and have any recommendations for me?

 

Anyone used SunF tires? 25-8-12/25-10-12

 

9bc9873f5b318d0df5f4fa12f019f674.jpge328c39c70560f6e509d9cef00a69e1b.jpg4e50470cb433d25147c2fbd6cedb3987.jpg

 

Thanks!

 

 

Sent from my iPhone using Tapatalk

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • logray
      Looking for Quadrunner Flywheel Starter Clutch Gear race diameter
      By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • HHurks
      CFmoto ATV Parts and Accessories
      By HHurks
      Yesterday I got a UForce 1000 as my first bike and I am wondering if there are any owners that could advise where I can find budget parts and accessories for it.
      I tried looking StarknightMT, but the filtering is a bit unreliable, so direct links or exact names are much appreciated.
      I'm mostly interested in sliders and side cases, but any advices for "must haves" are welcomed.
      Thank you!
    • quadnut20
      Clutch mods !!
      By quadnut20
      Just picked up a 2025 Yamaha Kodiak 700 fixing to do a EPI Clutch mod to it since I dropped bigger tires on it !! Air box , exhaust , and programmer next ! 

    • sunn
      2021 cforce 400s long crank, slow to start
      By sunn
      Maybe someone has the answer to correct a long cranking but did start after maybe 10 seconds?
      Temp was mid 70's, with ATV not run for maybe a month but on battery maintainer with full bat charge noted.  The atv started, but then died a couple times after repeated attempts.  But when run awhile everything was ok.  Although when starting now I do hear the fuel pump humming but seems to take a few ,"long" seconds before full prime pressure.
      Is this typical of a failing fuel pump?
      I've priced a replacement fuel pump on eBay for less than $40 so am tempted to simply replace it for good PM.  Just had all covers off so looks really easy to replace.
      Any ideas?
    • nberga
      Cforce 1000 touring Gates Belt
      By nberga
      Hi Guys,
      We've just removed a Gates belt from a cforce 1000 touring and it looks like an egg shape and we leave it on the side for about 1 week and still didn't got like the normal oval shape, any thoughts on this? Do you think it's normal?

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...