-
Popular Now
-
-
Similar Forum Topics
-
By WeeBee
I'm looking at buying a New "CarryOn" 5'x8' Trailer with the Ramp Gate and Mesh Floor from my local Tractor Supply store ! Anyone have any experience with this Brand of trailer to share ?? Thanks!
-
By kellogs
Hello,
Pondering on what would be better in terms of practicality vs. money spent. The ATV will be a small 125 cc Chinese brand that can be fully contained in a small euro-van (VW Caddy)
1. Load the ATV on a trailer while riding it.
Need to buy the ATV + hook + trailer (+ ramp?) and work on the car to mount the tow hook, of course.
Perhaps I can find a trailer than can do this -
Side question: what sort of mechanism that allows such loading is that, or, in other words, what sort of trailer am I looking for ?
2. Load the ATV inside the mini-van.
Need to buy the ATV + ramp.
Also need to push it inside as riding it won't be possible. The thing will weight some 100 kilos, about 1.5 times my body weight. I shall go for the longest ramps that will fit into the van, but still, not sure I can push it in and pull it out of the van without cursing my life - if at all doable.
What do you guys think ?
-
By bradleyheathhays
Unfortunately it looks like I have some people in my new neighborhood paying a little too much attention to my auto and for the first time I'm feeling a need to add some security system(s) to old yeller. I think just a basic remote arm system would do, not interested at all in remote start or unlock. I'm not familiar with modern alarm systems, but here's what I 'think' I need...
- Door switches for all 5 doors (rear hatch). Probably a PITA to install but that's only an initial idea.
- 'Bump' alarm (not sure what it would be called) for if a window breaks or if something is jarred
- Geo-location function like a low track or something similar
Additionally I'd like to install possibly 2 start kill switches. I'm not sure where inline these are normally installed but my impression is that directly in line with the key ignition switch would be common. But then what if someone jumps the starter with a screwdriver...would this type of switch work in that instance? So that leads me to the idea of a second ignition kill switch which would either be wired between the battery and starter motor, or between the starter motor and ground.
And last...security lugs.
So am I over thinking this here? What's your recommendation for what I really need and maybe a good but economic alarm system that can get this done?
-
By Frank Angerano
So I decided to pick up a small trailer if I could get one for the right price. I found this one for a few hundred bucks on Craig’s list. It is a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good.
I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.
I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well.
-
By davefrombc
I added a pdf of the wiring of the various connectors used in vehicle socket and trailer plug wiring to the "Other ATV files" section in downloads.
-
COMMUNITY SECTIONS
ATV FORUMS
QUADCRAZY MEMBERSHIP
Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.