Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

quadcrazy

Site Maintenance Scheduled

Recommended Posts

Website Maintenance Scheduled

We would like to inform everyone that QUADCRAZY ATV Community will be down periodically during the course of this weekend starting on Friday at around 8 pm EST.

We will be updating sections of the community and bringing in some new features. More information will come once we have completed all needed updates.

The bulk of the updates should be completed by the following day as long as we do not run into issues. The remainder, minimal updates, will take place the following 2 days as needed.

During this time, you will not be able to access your accounts and the site will be shut down, closing all sections like the forum, classifieds, etc.

You will receive another email once we have completed and are stable.

Thank you.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Jeff Miller
      I'm trying to troubleshoot a starting issue. For a while, maybe a year sometimes I would hit the starter button and I'd hear a single loud click, but the starter wouldn't turn. Usually if I could pull the pull start or roll it in gear it would then start. (now I'm thinking that was coincidence) Now it only clicks. I tried to check what I could, battery is good, solenoid clicks strong, cleaned all connections (which were 80% clean anyway). I started thinking the starter wasn't spinning. I pulled it and it spins freely. The gear that it contacts in the engine-I can wiggle it maybe 1/16th to 1/8th inch back and forth. When I reinstall the starter I feel it jerk when I hit the button. I'm thinking maybe it's the starter clutch? It seems when there's a problem with them they usually just spin freely and don't engage at all. Is it possibly something is causing it to lock? I'm a bit lost now.
    • By Steve Stahlschmidt
      Will not start with out a shot of ether then only runs until it's burnt! Replaced fuel pump, carb, fuel filter, fuel shut off, new plug! I'm lost now! Could it have a bad coil? prior to this it would start and run fine!
    • By Admin
      We would like to wish everyone a Fantastic Memorial Day Weekend!


      SUPPORT OUR TROOPS!




    • By quadcrazy
      If you are a new member, why not introduce yourself? This community thrives and grows with you and all our current members! We all want this community to grow and encourage new member registrations. That being said please help out QuadCRAZY by inviting other atv'ers to the community.
      QUADCRAZY NEEDS YOU!
    • By Sled Dog
      Hello Team!  Hopefully someone can help me.  I've been to the Suzuki forum and its pretty dead.  I should have been on this site a while ago as I own a Canam, Hondas and a RZR!
      Anyways issue is the ATV won't start.  Friend gave it to me to try get running.  They installed a Amazon carb and machine did the same thing.  This machine has 1100 miles and is not beat.  Appears to have led a gentle life.
      So the first thing I did was ask for the original carb.  They do have and brought it over.  But first I changed out all the old gas and put new in.  Got it to start but would not idle.  But could ride it around yard.  Its a manual, went through all 5 gears.  Runs like normal but would not idle.
      So I got a Shindy rebuild kit and rebuilt the original carb.  Reinstalled and almost the same thing.  Starter spins and it tries to catch but doesn't until it does.  Then it seems to run ok.  Idles high but after a while it will go down.
      So I take tank off and give a very good cleaning.  Took off the fuel petcock.  All looks good.  No fuel in the vacuum line so I believe its working as it should.  Cleaned carb again.  Adjusted valves.  Did not need.  Reinstalled everything and same exact thing.  Spins like a maniac for 10 or more seconds before it will start.
      Spark plug is black.  Brand new one too.  I checked the spark and did not see any.  Googled how to do it and I was doing it right, tried again, now I have spark.  Hmmm.  Kept checking and always had it.
      My battle plan now is to clean the Amazon (Chy-na) carb and install that one.  If it does the same exact thing I'll figure its not the carb.  If it does something different this will tell me nothing as I don't trust the Amazon carbs!
      But now I've read that these models Eigers have issues with the fly wheel magnets coming loose.  And affecting spark.  Anyone know if this sounds right?  Maybe if the spark is out of time it makes it harder to start but once started the running engine can overcome that?
      Oh yeah, compression is 130, spec is 142.  Not sure I trust my Harbor frieght compression tester though.  I'm bringing it to work to get the gauge calibrated.
      Sorry so long winded but I like to give all the details I can for the people in the know!  Anything anyone can suggest I do?  Thanks for your time!
  • Similar Tagged Content

    • By toonces
      Got my first quad this past fall a 2011 Grizz 700 EPS, and now that spring is getting close I'm thinking about getting back to work on maintenance stuff. So couple questions...
      1. What are some regular maintenance points that are done in the spring on these machines?
      and
      2. What are the regular maintenance points that are done every so many miles that I should look to do?
      Other than changing out a torn CV boot and cleaning some crap out of the air intake foam in the fall I really haven't done anything to the Grizz. So not knowing its maintenance history I'm assuming it's due for everything...all fluids changed out etc.
      Oh btw it's only got about 750 mi on it right now.
      Thanks I'm all ears
    • By quadcrazy
      As we close the 2014 year and plan for 2015, we have decided to shut down a few sections here on QUADCRAZY. Effective immediately, we are closing our Blogs, Groups, Events, Polls, Photo Battle, Quiz, and Music sections. These are not widely used by our community and often attract spammers. Any questions and posting should be primarily made in our forum section as we move forward.
      In 2015 we will focus on making sure our forum continues to be the primary spot for our members to gather, ask questions, and share their ATV experiences. We are also exploring ways to update our community to newer and more up to date platforms as technology is changing, mobile connectivity is growing, and some of our sections are not as "mobile friendly" as we would like.
      It's been about 10 years now for QUADCRAZY, we're looking for another great 10 years to come. Please continue to support us by visiting www.quadcrazy.com and participating in our forums.
      Thank you and Happy Holidays from the QUADCRAZY family to yours!
    • By Artifice
      ATV Trails, Motorcycle Trails, Motocross Tracks, California
    • By vegasbilly
      Aside from changing the oil and filters etc. what do you guys routinely do to maintain/tune-up your quad while the "season" KS over and the machine will be basically over for a few mos. I have a 2006 Sportsman 500 EFI APand I want to keep it a long time and want to do all I can to see that that happens.
      Thanks in advance for your time,
      Bill
    • By ds650man
      just wanted to say hello to everyone and looking forward to enjoying this great site
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...