Quantcast
Jump to content


Side by side


Bchickness

Recommended Posts

I bought a new tractor last winter, not a large one, but went with a Kioti after I sold my 1993 Kubota...

 

 I've since aquired a 2010 Gator diesel

 A 1999 Polaris Diesel ATV Engine (nothing else with it)

 A 1999 Artic Cat

 And a 2009 Polaris 500.

  I'll be selling the Gator next spring and most certainly buy a Kioti UTV.

  The Gator is ok in quality, nothing special, but JD is pricey on parts and its just "ok"...

  I hated my Kubota.  In 1993 they were still using a Generator on my tractor.  I know they didn't always (neighbor has a really old one that had a alternator).  The power steering leaked and when I tore it down it was built cheap and complicated.  The front end (4 wheel drive) bearings were simply captured and no way to adjust them so they would be tight, so, they just flopped around even after the rebuild.  I know people love Kubota's, but I sure don't.

  Artic cat looks great for a 1999.  I'm impressed, but, I'm just not finding parts for it.  If your not going to support a well made machine...why would I buy it? (Kubota is know for doing this as well)

  But my 1999 Polaris motor will mount right up to the 2009 and everything will simply swap right over.  I'm very impressed in that respect.  Which brings me back to the Gator. I needed new fenders.  I was told in 2010 they showed three different part numbers depending on the serial number...as mine is a old military unit it doesn't have a serial number you can find...  there is something to be said about a company that changes frequently on parts... That Polaris found something that works and stuck with it, I like... But the build quality doesn't seem as nice at the artic cat...but its also not a high end Polaris...

  So, look around, compare them all.  Look at longevity of parts (including support) and how accessible is service?  Are they know for frequent changes (JD is, I have a friend who works for them also)? Is the model your looking at easy to work on?

I put my Kioti side by side one 10 years older.  He listed all his "trouble" spots (just minor ones) and they did update those places in those 10 years.  But everything else was the same...

 

  Just my .02cents...

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

I have a polaris ranger 570 and use if for plowing snow on my acreage.  It currently has 3500 miles and haven't had a problem with it.  I would stick with the name brands, Polaris , Honda, or Yamaha so you are able to get parts for it down the road if you keep it around that long.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By ResQ91
      Hi guys
      My 87 Bear 350 won't start and could use a hand.
      Turn key on and Oil light turns on and then slowly fades out. (I think this is key to this) No start, not even a tick.
      battery and connections good
      A Solenoid post jump turns it over
      Neutral Safety Switch wire attached and seems good
      It has not had a wire/switch on Rear Brake Pedal ever since I had it.
      Any thoughts on some other things to troubleshoot this??
    • By Slitzer
      Hi,
      Got a Big Boss produced 2016 YM 2017 that gives DTC 520 285 2 (random)
      What I understand is correlation code for brakesensors, very little information in workshop manual.
      Removed front plastic to discover that no connector was mounted on the brake pressure switch!?
      The only "brake" information seems to come from the micro switch at the brake lever.
      Does anyone know if Polaris does anything special on the 6x6 or had this issue?
    • By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.
×
×
  • Create New...