Quantcast
Jump to content

Recommended Posts

Posted

I have a 2005 Honda Rancher 2-stroke. It's been sitting for a while. Yesterday I started it up and it idles well.

When I tried to drive it, it bogs down and misses when I accelerate. Drained fuel, added new fuel and carb

cleaner, and let it idle for a few minutes. It still bogged down, and I noticed a fuel leak under the carb. There's

a tube from the bottom of the carb with something that looks like a filter. The gas was leaking from the end

of the tube. Anyone have any ideas as to what the tube is, and what it actually does?  

  • Admin changed the title to 2005 Honda Rancher bogs down and misses when accelerate
Posted

That tube at the bottom has a one way check valve. Thats probably what you seeing and that is an overflow vent. That is overflowing because your seat and fuel bowl is probably clogged with gunk and thats the cause for both the drivability and the fuel leaking. Remove the carburetor disassemble it and clean it. Or get a nee carburetor

Posted (edited)

Gas is coming from that tube because your floats probably stuck Just clean/ rebuild your carb and if all else fails a new carb isnt too expensive and youll probably gain power.

Edited by bradley nelson
Posted

Open up your carb ,the leak is the overflow hose the float needle must be dirty so it doesnt shut anymore . Quite an easy job ,i would recomend à full cleanup of the carb because it must have gunk up from sitting for a while next time you lets à machine sit for some time it would be à good idea to add fuel stabilizer

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By hurnyak
      What is the best way to remove the carb on a 2000 quadmaster 500? Does the gas tank need to come off first?
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By Admin
      View File 1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      Submitter Admin Submitted 03/08/2026 Category Honda ATV  
×
×
  • Create New...