Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Andrzej Polak

Suzuki King Quad LTF300 Installing Winch

Recommended Posts



If you search on Google and click images, you'll find some pics of what winch installed on a king quad 300 looks like. Here's some I found:

king quad 300 winch installation  winch on a king quad LTF300 

King Quad Winch 300  suzuki king quad winch 300 

  • Like 1

Share this post


Link to post
Share on other sites

I have a bulldog winch mount on my 1995, it brings the winch up under the front bumper... but you have to use a smaller winch... 2500-3000lb would be the max size. I used the small Traveler winch from Tractor Supply. eTrailer sells the winch mount for under $70, and the winch itself was $80 with a coupon. I'm sure you could find a Badlands winch at Harbor Freight for $50. The item number on eTrailer is Item # BDW15135. 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By mike costa
      Has any one tried using the Harbor Freight Winch mounting plate on a 2001 Kawasaki 300 4x4 Bayou? 
    • By cavry
      I haa problem with the controller on a Harbor Freight winch.  The control box went out a while back. It has a manual switch on the handle-bar and a plug in for a remote that I never purchased. I replaced the solenoids and it worked a couple of times and is dead again.  
      Is there a universal replacement that anyone has used and would use again?  Remote control or manual /remote combo, no preference.
    • By 87tecate4
      View File 2007-2009 Suzuki KingQuad LT-A450X Service Manual
      Suzuki KingQuad LT-A450X 2007-2009 Service Manual
      Submitter 87tecate4 Submitted 07/14/2018 Category Suzuki ATV  
    • By Kristpj
      I know this tooic has been addressed by many, I’ve looked through many forums and pages. I did not find anything like the problem i have.
      I have a 2007 Kingquad 450. I have a new fully charged battery. When i turn the key, the dash flashes and seems to struggle before getting fully lite. We can hear a small relay near the computer clicking, i think it is the fuel pump relay. When i turn off the engine kill switch and press the starting button relays click and all the power shuts off, i turn the key off, engine kill switch then start over, power is there. Atv will start with pull start, but not elextricly. if i try to use my winch, all power cuts and engine dies. 
       
      Can anyone tell me what it may be? or has anyone fsced an issue like this before?
    • By chuckufarlie
      I tried to turn my Warn Vantage 2000 into neutral to spool out the line and the clutch is very stiff... I got it.
      When trying to engage it again, it was also very stiff and I ended up breaking off the thumb tab -- so I guess I will need to buy a new gear end housing for that.
      Anyway, is there some maintenance that is needed to keep the clutch turning smoothly or some trick I am missing?
  • Similar Tagged Content

    • By LMI
      I wanted to share an experience and a fix.
      Headed out was following a pole line, was looking for a cross track that may take me to this speckle trout looking spot on a creek.  All paths and semi paths... failed.  Second objective was to reach a speckle trout lake that has been recently stocked... followed 1 trail to dead end, followed second trail to dead end.... while investigating options on foot and the quad idling it died.
       
      It wouldn't start.  eventually it did... and when it did … it was essentially a pinned idle.  activating the throttle did seem to speed it up but it wouldn't knock out of the racing idle.  couldn't put it in gear at that idle speed.  got towed out.
      when I first got the quad, I ran it off a trail and buried it pretty good in the soft snow... eventually winched out.  It wouldn't start.  eventually did and it was fast idling.  not as fast as this last time. but still fast.  it eventually seemed to settle and I got it in gear and by the time I was back to the truck was acting ok.  chalked it up to the bike being at a bad angle in the snow.
      My investigation last year lead to the throttle position sensor TPS.  how to jumper the diag block to see the sensor position on the display,.  I focused on this nearly sure it was a detuned sensor or broken sensor again this time.
       
      I tore down the front plastic and stuck my head into the TPS area to see what I could see.  What I found was that the throttle body assembly had actually come out of the mounting area (not sure what it is called).  the ring clamp was loose I could move it easily.  Hopeful, I tore down the air intake assembly above it (air filter...etc) removed a sensor clip and a hose.
      I backed off the clamp some more and was able to reseat the throttle body assembly.  put some blue lock tite on the clamp screw.  When I was cleaning off the air intake assembly to ensure I dropped nothing down the intake, I noticed the underside of the air intake "box" also had a clamp.  this screw was completely missing.
      I went to the hardware store, bought a metric replacement (brought clamp with me), seated the assembly, settled the clamp blue lock tite that as well... 
       
      quad fired right up, idled normal, idled up without hesitation and dropped right back off.  Cost of solution $3.87 CND for a pack of 5 metric screws.  moral of my story was don't assume an idle issue is a throttle position sensor problem... there are a number of other factors including air pressure, which I believe was my issue.
       
       
       
    • By Andrew Serrano
      I have a 2000 Suzuki LTF -300 King Quad. My problem is it will start up great, very fast. It will run fine until it gets hot and I turn it off.  If I let it sit for a bit it will not start until I hold the throttle wide open and crank on the starter for quite some timr, acting has if flooded.....but I checked the spark plug one time this happened, went to change thinking it was flooded but only found a dry Plug????  It starts like if flooded but plug was dry, it takes awhile to start, then to get going I have to really rev it to get it clear and going...Thanks any suggestions would be great, thanks everybody in advance...!!!
    • By Azrial
      I just picked up a 2008 Kawasaki Teryx 750 LE 4x4 and am looking for Wench Suggestions. It was used by an old man to check his mail and only has 30 hours on it! I intend to use this on my very steep property like a small tractor. I had a old Ford 1220 Tractor and with its high center of gravity and lack of 4 wheel drive it was useless!

      To the point, I am looking a wench suggestions to help my new tool do its job! Even though the front bumper is drilled for a wench, I understand that I need a wench plate and that some wenches will not fit without body mods. Does 3500 Lbs capacity sound right?

      Thanks!
    • By cavry
      I haa problem with the controller on a Harbor Freight winch.  The control box went out a while back. It has a manual switch on the handle-bar and a plug in for a remote that I never purchased. I replaced the solenoids and it worked a couple of times and is dead again.  
      Is there a universal replacement that anyone has used and would use again?  Remote control or manual /remote combo, no preference.
    • By Gus Drake
      I'm helping the widowed neighbor out to do some oil changes on her quads. Any recommendations on what type of oil to run in these machines?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...