Quantcast
Jump to content

Recommended Posts

Posted

Pull cord is free and decompression lever is operating correctly. Installed a new spark plug. When I first got the bike it wasn't running I played around with all the wires to make sure everything was plugged in. The shift pattern is completely backwards from what I am used to. Neutral is all the way up. Thought I had the bike in neutral but it was in 4th gear. Pulled the cord and it started right up. Put a new battery in it and now it doesn't start on the pull cord whether it's in neutral or any gear

Posted

Yes it starts with the electric starter. Just found out the rectifier is bad and I'm supposed to go trial riding this weekend. Would be nice to be able to put start it incase the battery dies on the trail. Having trouble finding a rectifier...old used ones on eBay or a new one for $104.

Posted

Bring a small jumper pack. I love mine and it’s saved me countless times.  

Finding a rectifier may be challenging. The aftermarket ones are not so good.

I found one on eBay but you should make a move quickly based on the price. It’s oem as well  

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F223522113944

 

Arteck Car Jump Starter Auto battery Charger and 8000mAh External battery Charger Car Jumper for 12V Automotive, Motorcycle, Tractor, Boat, Phone with Clamps, LED Flashlight, 300A Peak 2.5L Gas Max https://www.amazon.com/dp/B01DVSSCG6/ref=cm_sw_r_cp_api_i_UMcqDb0QB1Q33

Posted

The jumper pack is a really good idea and the one on Amazon looks small enough to fit in the little trunk on the trx200. The rectifier is a good price but I'm not sure I want to buy a used one of a parted out bike. Just found another new one on Amazon for under $70.

Posted

Oem $79 ?   My personal opinion not that it matters is I would rather a used oem then an aftermarket. That jumper pack is a great addition to the take alongs.   It has a USB port for phones as well.  There was a topic a while back about what we all keep on our bikes while we are out and about.  You should look that topic up it’s super helpful.   

Posted

Thank you. I will take a look at that post. I am relatively new to the hobby and am happy to receive any advice. I have only been out trail riding once so far and I am hooked. Think I found my solution for parts my stepson has the same 84 trx200 that smokes a lot. Think I'm going to give him the $100 he said he'd sell it to me for. Maybe I'll even fix that one up for the wife.large.20190727_195646.jpg.c74f34a5324656b12eb48fab945c8cc5.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
×
×
  • Create New...