Quantcast
Jump to content


2004 Polaris Trail Boss 330 Wiring Help.


Hondasher

Recommended Posts

I have a 2004 Polaris Trail Boss 330 and I want to eventually fix it up if possible, but the thing is the transmission or Gearbox that allows you to shift into forward and reverse and such isn't connect to the engine at all, it isn't even bolted into the frame. Anyways the Secondary Driven clutch is missing. The ignition was busted so I switched it out and tried to hook up power to it and the lights wouldn't light up and it wouldn't try to let me start it with the electric starter. 

 

So I bridged the connectors on the starter solenoid and it cranks the motor. I was wondering if anyone knew why the dash lights don't work or any of the buttons. I did find a cable disconnected I have a picture of maybe someone can tell me what it's supposed to be connected to. It has 3 wires going to the connect Green Purple Red. I'll enclose a picture of it and where it is connected on the wiring harness. 

 

20200206_160622.jpg

20200206_160627.jpg

  • Like 1
Link to comment
Share on other sites

@Hondasher welcome to Quadcrazy. 
Sounds like you have an ambitious project on your hands. 
Can you post a few more pictures of that area of the plug? 
I will check the wiring when i get a minute but before you get into all that the fact that the drive train is unbolted is where i would start first.  
Either it was blown and someone was going to pull it out for repair OR someone needed it and never get it off the atv.
I would proceed with caution at first and check the big stuff out first. 

 

  • Like 1
Link to comment
Share on other sites

@Frank Angerano@Frank AngeranoThank you, I will provide more pictures when I am able, I am currently working. Anyways that was my initial thinking, for the Gearbox being unbolted is they either wrecked it, or it's a replacement they were going to put on. I want to first make sure the engine is viable by trying to get it to start once I figure out why the power won't work. Then if the engine is good and runs, then I can buy the parts I need to make it back into a good running quad. 

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

These are actually some very good four wheelers. I just finished reviving another one yesterday. One of the most reliable engines on any Polaris. The fact that the gearbox is off makes me think the gearbox was broken. Typically it’s not the engine that puts these in their grave, it’s that gear box. If you have free time, it’s certainly worth trying to get back to running/driving form. Good luck!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.
    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By Slitzer
      Hi,
      Got a Big Boss produced 2016 YM 2017 that gives DTC 520 285 2 (random)
      What I understand is correlation code for brakesensors, very little information in workshop manual.
      Removed front plastic to discover that no connector was mounted on the brake pressure switch!?
      The only "brake" information seems to come from the micro switch at the brake lever.
      Does anyone know if Polaris does anything special on the 6x6 or had this issue?
×
×
  • Create New...