Quantcast
Jump to content

Recommended Posts

Posted

I know this seems stupid to ask but how do I know which fuel line goes to which intake valve on my 1996 Polaris trail boss 250 2x4. It’s only single cylinder but I found out today the machine had little to no oil or gas and that caused a ton of problems for me to fix now. So how do I get it right?

image.jpg

image.jpg

  • 1 year later...
Posted

The Polaris trail boss was a 250cc two stroke that was Polaris's break into the ATV market from snowmobiles in the 80s, the 250 is a 2 stroke and there was a 325 four stroke, you should have an oil tank that is filled with 2 stroke oil that goes into a small pump then to the carb, then your gas line to the carb, the oil line is usually smaller, they do not really have valves. I f you are unsure if your oil pump works use premix.  

  • 10 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By docdoug72
      Has anyone had a suzuki 230 quad lock the engine up?  Its a well maintained bike, it locked up when my son was riding it. Pulled the plug, it has connected with the piston. I'm thinking the con rod let go.  I don't have a service manual.  Does the engine need to come out to check further?
    • By Thekevinjb
      Can anyone provide information on connecting a hitch to a Polaris. Anyone know where they sell small trailers for my quad. 
      thanks
    • By Atomusthenes
      This topic is being opened to discuss the feasibility of forced induction on small engines.
    • By Gwbarm
      Have you ever been on the trail and your tire valve goes bad. No way to break down the wheel and replace it. A lot of you probably know about this already i had heard of it but never used one. Just punch out the old one insert and tighten down the nut
       

       

       

       
      So far it has worked very well.
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
×
×
  • Create New...