Quantcast
Jump to content

Recommended Posts

Posted

Finally got some time to drag it up out of the weekds and do a little work on it. What I thought was a stuck-in-gear issue turned out to be a stuck-in-brake issue LOL. Just needs some TLC. Thinking of replacing fenders and such with some custom aluminum diamond plate panels. Salvaged a bunch from a pickup tool box I acquired. 

20210531_164216.jpg

20210531_174607.jpg

20210531_175946.jpg

  • 1 month later...
  • 2 weeks later...
Posted

They are badly cracked, but still in one piece. Someone tried plastic stitching/welding them but that failed. After working on it some more, thinking I might make some panels to pop rivet to the plastic like decorative panels. Easier that trying to remake everything and a lot of the plastic is still integrally sound as far as mounting to the frame. Working on getting it running first. Off to pick up battery and new ignition coil tomorrow. Sorting out wiring harness right now 😉👍

  • 1 month later...
  • 3 weeks later...
Posted (edited)

The only way to be certain of the problem is to start dismantling the motor. Begin by removing the side cover opposite the shift lever; the shifter shaft runs across the motor, and the shift ratchet may be seen under the side cover. If everything appears to be in order, you will need to enter the cases. Unfortunately, this requires the motor's total disassembly. I've met this problem while one of my friend's quad bikes suddenly broke, while we were planning a trip to Tenerife according to this guide https://riderly.com/blog/guide-to-renting-quad-tenerife-island/.

Edited by MechJony
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By fwsamm
      Im aware that this relay needs a positive (+) and a negative (-) to activate the other side. The blue wire is the neutral wire so when in neutral it gets ground. The green wire is from the parking break; when you pull the break in it gets ground (-). however one of those two needs to be neutral so that the positive from kill switch can go to the starter relay. The ground from the starter relay is from the start switch. Which one (neutral or parking break) should have a positive (+) voltage?
    • By Dsluder
      I am having an issue with a hs500. I bought it broken and have been trying to get it running. It seems to be starving for fuel. If I put my hand over the intake it will crank but will not run for very long because I'm not able to get the correct airflow with my hand. The things I have done so far are. Replaced the fuel pump, fuel filter, mass airflow sensor, idle air adjuster, fuel injector, cleaned the throttle body, replaced the ecu, and still the same issue. I notice the injector does not spray when removed from the head. I dont know if that is common. 
       
      I am out of ideas on what to do next. I have removed the fuel line from the injector and it is getting plenty of fuel. If anyone has an idea on what could possibly be the issue I would be happy to try anything at this point.
×
×
  • Create New...