1992 Honda Fourtrax 300 wiring

[Cadencewildbeast]

Hello all. I have a 92 fourtrex 300 2 wheel drive that has been out in the IN weather for about 10 years.   My main concern is mice and the wiring in it.   I have tried looking up the main harness on several parts places and for a 92 they don’t have that year.  I can find sets for 94.  Does anyone know if there are major differences between the years that would make the 94 not work on a 92?   Thanks.  

[Mech]

 

Some online parts places will let you see what other models, the part you choose, will fit.

So you look up the part you think's right for your bike, then click on the link to see what other models it fits, and you can see if it does the later models, or models from other countries. That will tell you if they all share the same loom, even if the other/later models use a different number.

[Cadencewildbeast]

4 hours ago, Mech said:

 

Some online parts places will let you see what other models, the part you choose, will fit.

So you look up the part you think's right for your bike, then click on the link to see what other models it fits, and you can see if it does the later models, or models from other countries. That will tell you if they all share the same loom, even if the other/later models use a different number.

Thanks that might help.  The 2 years do have different PN’s but that will be something to look into.  Also trying to get enough posts that I can download the manuals for both years also to look at the schematics 

[Mech]

I tried looking up your bike on a kiwi site but the wiring loom wasn't available.. so no link to compare them. Different models do quite often have different part numbers for different years or spec models, but when you check they are interchangeable..  I'd keep looking for a yanky dealer that will tell you what models the loom fits.

Or.. keep posting in here till you get permission to download. Comparing wiring diagrams though may not show you that the regulator for instance, has different plugs.. Or the ignition or stator..

[Mech]

Opps bad link..

Edited January 10, 2022 by Mech

[Finnforest]

I have a 1991 300trx and a 1992 trx and the wiring is not the same, the speedometer is not located at the same place (moved about 10cm and the 1992 have a cooling fan) other than that i havent noticed any difference, the cdi is in the same place, starter, alternator, charge regulator, handlebars is the same etc. If you call honda i dont think they can tell you if it works , they only see part numbers. My approach would be to try and start it and fix the wiring issues along the way.