Hisun Sector 250 shift problems

[Bhenn126]

I have a 250 that shifts, but display stays on R.

Won't move.

[Gwbarm]

You can check the connections to the information center, it sounds like a sensor not recognizing you have shifted, im a little suprized it will move forward if it thinks you are in reverse. I would try unplugging connections cleaning with electrical contact cleaner and plug them back in. That would be my first step.

[Bhenn126]

OK thanks...that will be my first step. But when I turn the key it won't start. It just dims my panel and won't even crank the engine. It will shift thru the gears so nothing is hanging up. But it doesn't want to show anything but reverse on panel. Also like I said, I'm not even getting a crank. Wondering if there is a sensor that is acting up.

[Mech]

There's probably a gear position sensor down on the side of the gearbox..  You could try to locate that and check it seems to be working.

A lot of bikes will start in gear if you put the brakes on enough to light the stop light.. Try that.. 

You might have a flat battery too or a bad starter cable by the sound of that dimming dash. If the dash dims when you push the start button then it looks like a bad battery or cable.