-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
-
Similar Topics
-
By Makj44
As it should be easy to see I am not a four wheeler mechanic so I apologize for asking for help, I replaced my OEM carburetor with a aftermarket carburetor and with y’all’s help adjusted the air/ fuel and it ran great until this evening and I noticed a smell of fuel I inspected carburetor area and found a steady flow at the vent line on the bottom of the carburetor so my question is is the float the only thing that will cause this problem? Before I installed the carburetor I checked the jets for tightness and they all seemed fine?
-
By DarkRider
Hello there!
I'm new to the forums, but not new to the hobby. Admittedly though, I'm not super mechanically capable. But usually my contributions result in the problems I've attempted to solve via help with the forums and I will post my solutions. Or it I've solved a problem myself, I will post about it and how I solved it.
I've owned a lot of used (ever bought new) ATV's from: Yamaha, Honda, Suzuki, Kawasaki, and Polaris. From sport to 4x4, and have developed all my biased opinions of each brand.
Well that's my intro in a nutshell!
-
By ft4u
I actually became a member back in January but now I am a premium member. I am purchasing a 2002 Honda ATV and it needs some work. Fairly new to the ATV world. I have worked on automobiles/trucks and small engines for most of my life as a hobby. From what I have seen so far it is a very helpful community on here and excited to have joined.
-
By TravisM
Joined a few days ago. fixing up a 01 Bayou 220.
Finally got to spark this evening with a New Igniter, CDi box and after getting the correct key switch,with help from a member on here providing me a wiring diagram. carburetor was removed for attempted cleaning by previous owner, so im putting a new one on it, All the plastics are in good shape, but not on the machine except for the front "hood".. all the fasteners for them were MIA, so i'll probably just remove the plastics to keep them from flopping down or do a poor mans ziptie job and make it look half way decent.
any recommendations for a good cheap place to get tires for it? don't need mudding tires or anything. just need tires that will hold air.
Thanks.
-
By joshua91673
hi every one .anyone out there my issue is my kick start wont stay out i have to have some one pull it out. it pull out easy just wont stay out to kick it over .kicks over and starts no problem
also does this quad have a ajust mint for the rear spring .it sags when i get on it .or is this normal . thanks guys for your time
first post
josh ohio
-
-
Gallery Images
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.