Quantcast
Jump to content

Recommended Posts

Posted

My 9yo grandson has expressed interest in ATVs. Ran across a deal on a 2023 Hawk 110. Is this a decent model, and is there anything I should look for? I'm sure his 12yo brother who is small for his age will be interested too. I was scouting for a 50cc but this has a governor so I think that will let me keep speeds down, right?

Posted

 Vittaci is a company in Texas that only sells to businesses. Perfect, nice litlle bike, it has a 110cc Honda clone engine so i think parts are readily available , lots of those engines out there. It does have a throttle limiter which you can adjust , but at 9 it wont be long before he is going to want full power

 

Vitacci Motorcycles Inc.
2244 Luna Rd, Ste 140
Carrollton, TX 75006

Sales:  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By Maxg_57
      Is anyone still active on this club
    • By johndeerefarm
      Is there any way to mod an Outlaw 50 to increase the speed? The size is perfect just would like a little more top end speed. Thanks
    • By anthonyd256
      I have a 99 Yamaha bear tracker and I have converted the front brakes from drum to disc fairly easy but I cant figure out how to convert the rear with out hacking apart the rear arm. tried to use parts from a wolverine since the rear arms look similar but the caliper mount didn't line up on the bear tracker axle. Can anyone give me any clues or has anyone successfully converted the bear tracker rear brakes. I would even purchase a conversion kit if there is one. Any help on this would be greatly appreciated.
    • By p5200
      Hello folks, my machine wound up with I think water in the tank etc. It runs but speeds up and slows back down randomly. When not running I don't see gas dripping  from the drain nipple on bottom of float bowl and drain screw is closed tight. With normal idle speed I see no leaking. When the idle speed increases quite a bit on it's own, gas appears to start slowly dripping from float bowl drain nipple? I'm wondering if the carb is flooding and the gas is actually coming from higher up and just appears, to be coming out of nipple but, is actually running down the sides of the nipple? I put a kit in the factory Mikuni carb last year after sitting for a while and I think the gas in the jug I used had drawn moisture. I plan to pull the carb tomorrow and clean everything out. I was just curious if anyone else thinks it's probably something in the carb and is, acutally a flooding problem? Thanks Folks! 🙂
    • By dvs1961
      Just bought a new hisun ,been shopping for a year or more for a sxs   best bang for the buck...Are there any lift kits out there for a 2022 Hisun 750 sector ? links thanks
       
×
×
  • Create New...