Location of rear 12V accessory plug on 2024 Outlander 700 Xmr

[Coyote251]

I am hooking up a speaker on the rear of bike and want to use a factory auxiliary switched plug and not have to cut into the factory wiring or add another switch. I have read a bunch of posts that say there should be an auxiliary 12V connector in the front and one in the rear. I found the one in the front when I hooked up my winch but cannot find any in the rear. I have seen some pictures showing one on the right side attached to the down tube behind the side cover, but there is nothing on my 2024. Can anyone confirm that there is a auxiliary 12V connector in the rear on the 2024 700 Xmr? If so, can you please tell me where it is (with a picture if possible)?

[davefrombc]

Have you tried an AI search?..  I did and came up with this..  Hope it helps . 

Rear Location: A second accessory connection is found on the right side of the machine, below the seat area behind the plastics or near the top of the rear strut.

[Coyote251]

I found the same thing but have still not been able to locate the accessory plug. I would figure that I would be able to see it without taking all the plastics off the back of the bike. Ideally, at the least I would like to confirm that it exists before I start peeling plastics off.