Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Sign in to follow this  
utvboard

New Polaris RZR Baja Front Bumper

Recommended Posts

PolarisRZR-Bumper-2-744470.jpg

PolarisRZR-Bumper-1-704913.jpg

This is the new RZR Front Bumper from RZR Tech. This serves as a totally rigid front bumper and brush guard but also as a heavy duty front-upper chassis reinforcement. This bumper fits the standard RZR 08-09' (w/ removal of the front sway bar) and it also fits the RZR S.

The factory didn't give us much protection for the front or rear of teh RZR, or a lot to work with. But we've come up with some excellent solutions that fit well and look great. Bumpers are made from various sizes of DOM tubing in precision production fixtures that allow for easy installation and the best protection available for your baby. They fit tightly to the body, so the size of the vehicle doesn't change much and there's nothing protruding. These bumpers have already proven to pay for themselves in an accident. Don't find out the hard way.

For installation, you will need to drill four 3/8" holes in the dash bar for the provided hardware to fasten the chassis stiffener to the frame. Besides this, the kit is all bolt together. There is no plastic cutting needed.

Price is $425 w/ Red, Black (or new) Sparkle Silver powdercoat. Price includes installation hardware.

RZR Tech

Website: http://www.rzrtech.com/

RZRtech.com is a division of Spectrum Offroad Inc. the same company that brought the world the Spectrum Sandsports and LT-Rhino product lines. Our parent company has recently been heavily involved with the highest level of Offroad racing and has handed down some pretty amazing technology for us to use in our RZR product line.

More...

Share this post


Link to post
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Forum Topics

    • Big bear 350 front pulls down when pulling away

      Hi my 350 tends to pull down on initial acceleration which is the opposite of the other quads I’ve driven (not too many) is there a problem with the front end ? Its sitting on Bear Claws if that has any effect ?

      By Belmontie, in Yamaha ATV Forum

      • 5 replies
      • 48 views
    • ATV Front End Alignment How To

      Here's a good article and video on the basics when it comes to ATV front end wheel alignments. Source: http://www.cyclepedia.com/manuals/online/free/steering/atv-front-end-alignment/ When you hear the words front end alignment what comes to mind? Automobiles and potholes may be the first thought. There are other four wheeled vehicles out there running over a lot more than potholes. ATVs and side-by-sides live hard lives crawling over rocks, hauling loads, and crossing trails no other man-made vehicle would dare. One of the most basic services these vehicles call for is the adjustment of the toe-in of the front wheels. The Suzuki Eiger LT-F-400F calls for this to be checked initially after 100 mi. or 1 month of use, and every 600 mi. or 3 months for the rest of its operational life. Be it a Yamaha Banshee, 50cc mini-quad, or Kawasaki Mule this is a periodic maintenance item that is essentially the same no matter the scale of machine. Toe-in specifically refers to the amount the front wheels are pigeon toed. At axle level the center of the front tires are closer in the front than in the back. Most ATVs and side-by-sides call for the front wheels to be slightly pigeon toed to parallel. Keeping the toe-in aliment in specification and adjusted correctly is important for performance, safety, and tire wear. If the front end of the vehicle is in a toe-out position, duck footed, the tires will wear more rapidly and the vehicle will be inherently unstable. In addition, if the toe-in adjustment is in specification but it has been improperly adjusted it may put excess strain on the steering components.   The first step in checking the toe-in is to check the tire pressure. Make sure the tire pressure set correctly in all four tires. The air pressure in the front tires should be as close to the same as possible. Place the vehicle on a level surface and position the steering straight ahead. Be sure to check with the appropriate service manual to see if there are any extra specifics for the vehicle. The Suzuki Eiger for example calls for the vehicle to be weighted as to simulate the rider. Make a chalk mark on the front, center of each front tire at the height of the front axle. If available set up a toe gauge so that the pointers line up with the chalk marks. Measure the distance between the front chalk marks. Record this measurement as A. Rotate the front wheels 180° so the marks remain at axle height, but are now facing to the rear. Record the distance between the marks on the backside of the tires as B. Subtract the front measurement A from the rear measurement B to calculate the toe-in. If the number is negative you have a toe-out condition. Compare your toe-in figure with the factory specification found in the vehicles service manual. To adjust the toe-in loosen the lock nuts on the tie-rods. The outer tie-rod lock nuts often have left hand threads. Turn the tie rods with a wrench at the flats to change the toe-in. Be sure to evenly adjust the left and right tie-rods for proper alignment. Check with the service manual to see if there are any specifications for the length of the tire rods or the amount of threads that should be showing. If the tie-rods are not adjusted according to the OEM specifications the proper toe-in may be achieved, but the vehicle will not steer correctly and it could be at risk of breaking a tie-rod. When the adjustment is correct hold the tie-rod flats and tighten the lock nuts to specification against each side of the tie-rod. Take a slow test ride to make sure the steering functions correctly.   Check out this additional video on ATV wheel alignments:  

      By Admin, in General ATV Discussion

        
      • 26 replies
      • 1,498 views
    • 2000 and 2003 Yamaha Kodiak same chassis for snow plow?

      Good evening   Can anyone tell me if the 2000 and 2003 Yamaha Kodiak machines have the same chassis?   I want to put a specific snow plow on my 2000 but the manufacturer dose not list a mount earlier than 2003.   Thank you

      By Dan C, in Yamaha ATV Forum

        
      • 1 reply
      • 109 views
    • Lower front brake cables for Yamaha YFM225 Moto 4

      Hi, as title suggests I am looking for 2 lower front brake cables for the Yamaha YFM225 Moto 4. Does anyone know where I can get them. Many thanks

      By Justin James, in Yamaha ATV Forum

      • 3 replies
      • 106 views
    • 1998 Kawasaki Bayou 4x4 clunking sound front end

      I'm hearing a clunking sound from the front end.  It doesn't happen when I bounce the front end up and down on the shocks while the motor is off--only when driving.  There is a small tear in the CV boot on the axle so I planned on replacing the boot.  Could a bad axel cause a clunking noise when thottling forward?

      By Achilles, in Kawasaki ATV Forum

        
      • 3 replies
      • 151 views
  • Similar Tagged Content

    • By Admin
      View File Baja Motorsports WD400U ATV Service Manual
      Baja Motorsports WD400U ATV Service Manual
      Submitter Admin Submitted 10/19/2018 Category Other ATV  
    • By Admin
      Baja Motorsports WD400U ATV Service Manual
    • By Zachary Fischer
      Engineering student here looking for some help, I need to know how much tire size effects how well an atv rolls over logs, rocks, ruts, etc. I was looking into ditching the current 23X7-10 razor II in favor of 20X6-10 itp quadcross mx2 tires, this would cut 8 lbs of rotating mass off the car but given the endurocross nature of the tracks I need to know if we'll still be able to get over logs. Im open to other tire suggestions as long as you include their weights. 
      The vehicle is basically a 100% scratch built Honda pilot at about 400lbs and will be used exclusively for SAE BAJA. 
      Thanks,

    • By RoxanneRoseReid
      Need a polaris manual for a 1994 2 stroke 2/4x4 quad free. can you please post a link I can click on Thank you. Roxanne
    • By buzzar56
      I am looking for a free repair manual for a 2003 Polaris sportsman 500 ho atv. all the posts on here lead me noplace
      thanks fred.
  • Recently Browsing   0 members

    No registered users viewing this page.


×