Quantcast
Jump to content

Recommended Posts

Posted

My friend has 04 660 Raptor, when he goes to start it, it has a hard time starting. It continuously turns over and this something sound like it hits hard and binds up. A loud clanking noise. Is this maybe the flywheel/starter problem? Need help asap. Thanks.

Posted

To start, I would visually inspect the starter gear and flywheel. If you can't see anything obvious just by looking at it, then turn it over while it is exposed and see if you notice anything. Pull the spark plug boot off so it doesn't start while you have the side cover off. The problem could also be timing related, check the flywheel key, if it sheared off then the plug will spark at the wrong time and could cause combustion too early and stop the motor from turning.

Posted
To start, I would visually inspect the starter gear and flywheel. If you can't see anything obvious just by looking at it, then turn it over while it is exposed and see if you notice anything. Pull the spark plug boot off so it doesn't start while you have the side cover off. The problem could also be timing related, check the flywheel key, if it sheared off then the plug will spark at the wrong time and could cause combustion too early and stop the motor from turning.

Well said.

My friend has 04 660 Raptor, when he goes to start it, it has a hard time starting. It continuously turns over and this something sound like it hits hard and binds up. A loud clanking noise. Is this maybe the flywheel/starter problem? Need help asap. Thanks.

Hard time starting, does it eventually start? If it does, how does it run once it starts. If it never starts, pull that spark plug out and check it. Check your spark.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
×
×
  • Create New...