Quantcast
Jump to content

Recommended Posts

Posted

I got a big problem. Bike will crank only with the throttle pinned all the way but wont rev it just kinda bogs and as soon you start to let off it dies. The bike was running fine prior to this. Its been sitting about a month in the shed. Its getting gas, has fire, 105 psi. This is my wife's bike and she does not ride it anymore so I was getting it out to clean and sell but now this. Any help would be greatly appreciated. :bangheadc:

Posted

You may be getting fuel, just not enough. First try tapping on the side of the float bowl with the handle of a screwdriver, you may just have a stuck float. Then try draining the tank and the carb, start with fresh gas. Then make sure the fuel petcock and fuel lines are clean and clear. Next you may want to take the carb completely apart and clean everything. I believe that is a 2-stroke, so while the carb is off, check the reeds. If none of these things help, check your flywheel key and test your ignition components, coil, CDI, stator, plug and wire. Also, 105 psi is pretty low, so that is not helping things any.

  • 10 months later...
Posted
I got a big problem. Bike will crank only with the throttle pinned all the way but wont rev it just kinda bogs and as soon you start to let off it dies. The bike was running fine prior to this. Its been sitting about a month in the shed. Its getting gas, has fire, 105 psi. This is my wife's bike and she does not ride it anymore so I was getting it out to clean and sell but now this. Any help would be greatly appreciated. :bangheadc:

There is a vent line on the carb sounds like it is pinched Other ideas at atvwheelin.comin the tech tips:huh:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By HeWasRidinDirty
      The one I need to replace has a 2 wire plug coming out of it. Searching eBay I see tons of them with only 1 wire . WTH???

×
×
  • Create New...