Quantcast
Jump to content


Well I am here... Hello


zamaro

Recommended Posts

New to the quad family... Worked a deal where I bought my old neighbors 1989 yamaha moto-4- 100cc 4 stroke engine. A nice quad for my first quad... Anyway I picked it up for

$120 bucks... I then installed a new coil for the $35 bucks or so ... i am into the thing for right around $150 or so... I just can not see paying 2-3-4- grad for one.... I did work a couple deals and added a pocket quad 2 cycle 49 cc for $200 and a sunl 90cc quad that I traded a Nintendo Wii {$250} and pocket bike {I had $50 into it} for the sunl.

opps i also most forgot the HONCHO quad that I have from early 80's that i picked up for $200 that has a 8hp Kolher engine on it...

so for my 4 quads I have $950 into them...

and all of them run... the Honcho needs to be taken more apart and finished restored...

:)

So I am learning on the Moto-4 and eyeing a yamaha raptor ....

More to come...

i am located in MA in East Bridgewater anyone from down in this area?

Looking for places {dare I say it } local to ride....

Link to comment
Share on other sites

hey thanks guys {and gal} i am trying to work the nextr deal on abandoned raptor

I think i offered $200 the last time I went by the house

lindasquad.jpg

I thnk its a raptor....

I think it is worth $200 ...

Not sure of runing etc etc just figue that even if I have to rebuilt top end still cheaper than 3-4 grand ...

What do you all think?

Zamaro

Link to comment
Share on other sites

  • 7 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By ResQ91
      Hi guys
      My 87 Bear 350 won't start and could use a hand.
      Turn key on and Oil light turns on and then slowly fades out. (I think this is key to this) No start, not even a tick.
      battery and connections good
      A Solenoid post jump turns it over
      Neutral Safety Switch wire attached and seems good
      It has not had a wire/switch on Rear Brake Pedal ever since I had it.
      Any thoughts on some other things to troubleshoot this??
    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
    • By jatho
      Has anyone else had an issue on older king quads where the oil would leak from the top of the head (due to a failed gasket) and drip onto the hot exhaust? Mine got so hot one time it caught fire. Just wondering if this is a common issue, as I've seen the same thing happen on multiple bikes that were the same model. 
×
×
  • Create New...