Quantcast
Jump to content

CRJ spacers $30 shipped strongest on market

getdrunk
 Share

Recommended Posts

getdrunk Rookie

getdrunk

Posted
Posted

$35 shipped

STRONGEST SPACERS ON THE MARKET

Fits most quads

Perfect condition

Made from stress proof steal

The spacers im selling are in perfect condition but used.

these wheel spacers are the toughest you will find when it comes to strength , durability , and ease of use. With these spacers you DO NOT have to remove your stock studs. The spacers female thread screws down on your origional studs and the flat bottom seats tight against the wheel hub which prevents the stock studs and spacers from being able to flex side to side. The wheel is then placed back on over the spacers studs. An extremely strong yet simple design.

These atv wheel spacers are machined from a patented stress proof steel which is designed specifically for high stress aplications.

FAQ: "Will these spacers break or break my wheel studs?" - Absolutely not. The wheel spacers seat flat against the wheel hub which keeps everything solid and unable to flex. In fact, we have pushed stock axles to the breaking limit numerous times while jumping with our wheel spacers installed. The strength of the wheel spacers should outlast your stock components in a worst case scenario.

These wheel spacers fit almost any atv with the common 10x1.25mm wheel studs including the following models. If your model is not listed e-mail www.crjperformance.com

YAMAHA - rhino raptor 350 raptor 660 raptor 700 yfz450 banshee warrior blaster kodiak big bear wolverine bear tracker breeze.

HONDA - 250R 250EX 300EX 400EX TRX 450R recon rincon foreman rancher sportrax 90cc.

SUZUKI - vinson quadsport 250 LT R450 LT Z400 elger ozark 250.

KAWASAKI - prairie bayou brute force lakota mojave KFX400 KFX700 v force KFX80.

KASEA - skyhawk 170 250 outback 50 90.

Red Cat - all red cat models over 50cc.

Kazuma - all Kazuma models over 50cc - (Rear Wheels Only).

Eton - all Eton models over 50cc.

Kymco - all Kymco models over 50cc.

Like said above.^^^^

I broke my axle and the spacers were in perfect condition. I hit big jumps to and FLAT land at 15ft of air and spacers still perfect condition.

Im selling only because i dont need them no more.

Spacers im selling are only enough for eather the front or back(8 twist on's.).

[email protected]

  • 4 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • Gwbarm
      Toughest Most Reliable Quad ever Produced
      By Gwbarm
      It seems every ATV i look at to buy used has no title, does everyone loose there title, or do they change hands so often the title is lost in the shuffle. The ones that do have titles are triple the price. I am new to buying used quads is this pretty standard procedure.
      I know all quads are good and tough but thought it might be good to hear opinions as to what member think is the best, from your experiences.
    • Mikey69
      How did you get into Quads?
      By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • Sha35297
      2016 TRX500FA7 Honda Rubicon, Mil light comes on when downshifting from 4th to 3rd gear.
      By Sha35297
      I have this bike in my shop for a customer. It was sunk completely under water and left running until it killed. I did a complete engine rebuild. Replaced all bearings, crank, oil pump, and various other components. Engine starts and runs great. It will shift up through all gears perfectly in automatic and in ESP, but when slowing down it gets to 3rd gear and the MIL "-" light comes on and stays on. No flashes or anything and it will not shift gears. Kill the engine and restart in ESP mode and it is able to shift to neutral and start over. Does the same thing while down shifting in ESP mode. I replaced shift angle sensor with no improvement. Checked oil pressures as per repair manual "74psi" and higher with higher RPM's. With no MIL codes to point at an issue. I am at a loss as to what else to check or replace. Has anyone else ran across this issue?
    • Old55
      Selling 1994 king quad $400.00 Complete quad.
      By Old55
      Selling 1994 king quad.  $400.00 Complete quad. Engine is stuck. 
      Located in Highland Mi.  248 514 0888  Old55
    • Guest Fox300exchic
      Lets see them quads ladies!
      By Guest Fox300exchic
      Here's mine...


COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...