Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

MiBassman

Need winch wiring help for a 2007 500 Foreman

Recommended Posts

:confused:2007 honda forman 500, viper max 3500 winch. I have it bolted in and all the heavy duty wires routed where they need to go. My problem is where to hook up the small red wire that comes off the toggle switch wire harness. Some recomend putting it on the back of the key switch but I really don't want to dissasemble the dash to do this. Can anyone tell me if there is a place on my forman that is easier to get at that will work for the power scource for the switch? I prefer not to "cut into" a wire but will if I have no other option. Also where all do you put fuses ? My winch came with none.

Please help !

Struggling in Michigan

Share this post


Link to post
Share on other sites


:confused:2007 honda forman 500, viper max 3500 winch. I have it bolted in and all the heavy duty wires routed where they need to go. My problem is where to hook up the small red wire that comes off the toggle switch wire harness. Some recomend putting it on the back of the key switch but I really don't want to dissasemble the dash to do this. Can anyone tell me if there is a place on my forman that is easier to get at that will work for the power scource for the switch? I prefer not to "cut into" a wire but will if I have no other option. Also where all do you put fuses ? My winch came with none.

Please help !

Struggling in Michigan

12 volt acc plug is where I spliced my winch on my Ruby.

Share this post


Link to post
Share on other sites
I never thought of putting it there. Thanks BuckBilly, I'll look into that.
When I get the Ruby back from the shop, I'll let you know what color the power wire is on mine.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Kaj Colum
      Have a Bayou 400. sometimes when I press the start button i hear the solenoid click but the starter does not engage. Here is the strange thing though, when that happens if I kick the kick start just once then press the start button starter engages normally. Any ideas?
       
    • By Eddie Rahm
      whats up fellas....the white wire going from the throttle body came unplugged from the circuit  board and im not sure where it plugs back in to ? i see where the red wire goes but im not sure where the white wire goes...im not even sure what those wires do..any help would be appreciated..thanks. 1996 polaris sportsman 500 4x4 push button awd.
    • By scotty2hotty01
      i have a older honda 350 cc quad that seems to start and other days will not.spark seems to be gone and there when it does run.I checked newer coil odd a older yet Honda but no help and idea I going to find the serial number as forget the year but believe around 1995 to 1997 year besides that great quad but cant run it so great this way  and need it for chores around the acreage. Any help would be great. Ive check all fuses as well as the fusable ling which was fine until I screwed with it now need to buy another as have it wired not so safe.I handy but now have copd which takes away the brain power some.Any help would sure be appreciated 
    • By Carl Edouard Denis
      Hello to al, ,
      First time poster long time ATV rider. I just go a used 2003 TRX650 got the card cleaned and it started up right away. ONly problem I am having is that its idling high. Any ideas as to wy this may be happening?
       
      CED
  • Similar Tagged Content

    • By mikeexplorer
      Wiring diagram for 2007 Arctic Cat 700 EFI 4x4
       
       
    • By gregj49
      Blows out black smoke when you rev it up how do you adjust the carb?
    • By Racer944
      Hi Folks;
      Has anybody on here installed a winch on a 2003 Magnum 2x4? I am using a Cycle Country adapter plate (only one I could find), but am having a bit of trouble getting it all to fit properly, and am looking for someone that may have done this install and/or may have some pics of the installation.
      Thanks!
      Eric
    • By frankmako
      My 2005 Arctic Cat 500 started leaking fuel from the top right hand side of the carb. It looks and feels that the fuel is coming from under the throttle cable housing area just above the primer pump. I have not had time to take carb off. Has anyone had a leak on this side and area of their carb?
    • By toonces
      My mother has just developed a fairly serious case of sciatica, which is a condition where you have some serious leg pain as the result of a pinched sciatic nerve. One of the exercises she does in physical therapy is simply the therapist holding onto her foot and pulling away from her hips as she lays on her back on a table. To replicate this exercise at home they have recommended an inversion table (where you turn upside down and hang from your feet), but since she's not too keen on this idea I'm trying to figure out how to replicate this exercise...which is where the idea of a remotely operated winch comes in.
      I don't really have a wide range of knowledge when it comes to what equipment is out there that can help me accomplish this goal, but I'm not too shabby at designing things and since I just installed a superwinch on my grizz this is the first idea I've come up with.
      Basically I'm imagining using some kind of winch whose rope would be worked through a pulley system that would end attached to a shoe which Mom would put on, lie down and use the remote switch to gently stretch the leg.
      - Winch (if an ATV winch) would be powered by a 12v car battery hooked up to a trickle charger
      - Safety mechanisms would include...
      - a light switch dimmer inline between the 12v battery and the winch so speed can be adjusted.
      - possibly using one of those stretchy rubber exercise resistance bands in the line segment to regulate and ease the pulling
      - a remote power cut off switch paired with the remote 'in/out' switch
      Honestly I could just go ahead and make this system myself, and I'm fairly sure it would work, but I thought I'd bounce this idea off a mechanically minded community to see if there are any ideas how I could improve on the design.
      Since I'm only familiar with ATV winches at this point that's what I've imagined using. But if anyone is aware of a 110v based winch that would be more appropriate, that would surely help in simplifying powering the system since it'll be located indoors. Only requirement for the winch would be that it would need both an in and out function operated by a remote switch. And since the winch would only need to pull between 10-20 lbs it wouldn't need to be nearly as beefy as the ATV type.
      Sorry for the long write up here but I'm certainly glad for your time and open to your opinions and suggestions.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...