Quantcast
Jump to content

Recommended Posts

Posted

:confused:2007 honda forman 500, viper max 3500 winch. I have it bolted in and all the heavy duty wires routed where they need to go. My problem is where to hook up the small red wire that comes off the toggle switch wire harness. Some recomend putting it on the back of the key switch but I really don't want to dissasemble the dash to do this. Can anyone tell me if there is a place on my forman that is easier to get at that will work for the power scource for the switch? I prefer not to "cut into" a wire but will if I have no other option. Also where all do you put fuses ? My winch came with none.

Please help !

Struggling in Michigan

Posted
:confused:2007 honda forman 500, viper max 3500 winch. I have it bolted in and all the heavy duty wires routed where they need to go. My problem is where to hook up the small red wire that comes off the toggle switch wire harness. Some recomend putting it on the back of the key switch but I really don't want to dissasemble the dash to do this. Can anyone tell me if there is a place on my forman that is easier to get at that will work for the power scource for the switch? I prefer not to "cut into" a wire but will if I have no other option. Also where all do you put fuses ? My winch came with none.

Please help !

Struggling in Michigan

12 volt acc plug is where I spliced my winch on my Ruby.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By Admin
      View File 1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      Submitter Admin Submitted 03/08/2026 Category Honda ATV  
    • By toe420
      Hey everyone, I just picked up a 91 trx350 4x4 with a blown top end. I don't know what happened to the poor thing but the cam journals that were round are oval shaped now. I also bought a running engine from a 92 trx350 4x4 to swap into the 91. Is there anything in particular I should be checking while the engine is out and I have good access to it and the frame? 
    • By ButchM
      Hisun 700 EFI. Replaced TMAP sensor had broken off . Fuel pump pressure 41psi. The only way I can keep it running (and runs fine) is to close off fuel return line. 
×
×
  • Create New...