Quantcast
Jump to content

Recommended Posts

Posted (edited)

Wheelie off the start then i missed 3rd...

th_MOV01424.jpg

On my black and yellow banshee in the middle...

th_MOV01432.jpg

On my banshee on the far side wheelie off the start...

th_MOV01423.jpg

Me on my crf250r 5th gear throwing a one hander... We measured and we were jumping over 85ft...

th_MOV01461.jpg

My buddy Austin on his crf250r... One jump of his measured 120ft...

th_MOV01462.jpg

Some pics of me jumping

DSC01380.jpg

DSC01382.jpg

One hander

DSC01384.jpg

DSC01465.jpg

Some pics of Austin jumping and a good roost pic

DSC01370.jpg

DSC01451.jpg

DSC01458.jpg

DSC01351.jpg

DSC01405.jpg

Edited by jigolbeep
Posted

we always have a blast... idk how they compare to the Oregon dunes or St. Anthony, idk much about those two... waynoka my be a smaller but it has all kinds of places to jump... we are planning a spring break trip next year and idk if ill even take my banshee along, i felt so much better on my crf and i wasnt sore on the trip home....

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
×
×
  • Create New...