Quantcast
Jump to content

Recommended Posts

Posted

It is nice to have those adjustable shocks, adding air is much easier and cheaper than having them re-sprung and/or revalved and far less expensive that buying new shocks. I am seriously considering the Fox Floats when I decide to upgrade my suspension. I think even something as minor as radiator hoses will help that yellow subframe blend in a little better. Are you still considering having the upper a-arms pc'd yellow?

Posted

I know those probably weren't cheap, once you get used to the extra width I am sure you will find they were worth the money. Your machine will stay flatter and feel alot more stable in corners, gets a little hairy in the tight stuff though. Do you have a steering stabilizer? If not you may want to consider one when your finances allow it. I know mine was worth every penny.

Posted

Nice, some people don't like wide quads, especially woods riders, I personally prefer the extra width now that I am so used to it. At one time I had considered buying some offset wheels so I could make it narrower, but I have come to prefer the extra width, I just bought a good steering stabilizer for those tight areas where I am likely to catch a front wheel on something. I was shopping for a KFX or a YFZ when I bought my quad, but I found the best deal on the LT-R, I was a bit worried that I wouldn't like the wide track, but in hindsite, I feel I bought the right machine for me. I love having programmable fuel injection, the frame is heavy, but bullet proof and I have come to love the wide stance.

Your quad looks bad as* btw, wide and mean looking. Good job.

  • 5 years later...
  • 3 years later...
Posted

Nice job!

I finished painting up the frame on my Suzuki LT250 a year ago. It took me days to strip everything from the frame as so many bolts were seized! Glad I took the tine to do it though. Now Ive just got to put a new barrel on her and shes going to purr!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Popular Now

  • Similar Forum Topics

    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By Admin
      View File 1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      Submitter Admin Submitted 03/08/2026 Category Honda ATV  
    • By toe420
      Hey everyone, I just picked up a 91 trx350 4x4 with a blown top end. I don't know what happened to the poor thing but the cam journals that were round are oval shaped now. I also bought a running engine from a 92 trx350 4x4 to swap into the 91. Is there anything in particular I should be checking while the engine is out and I have good access to it and the frame? 
×
×
  • Create New...